Sorry but a "918LX" is an HP3000(MPE) system and that RJ45 -NEXT TO-
the MFIO card will only work on an HP9000(HP-UX) system.
Neither MFIO version (SCSI/console/LAN -OR- SCSI/MUX/parallel) has the
RJ45. It is on the proc.

                  Bob J. -- Ideal Computer Services
                  http://www.icsgroup.net



Greg Terterian wrote:
> I have 918LX box at the office.  At the back of the box I have the I/O card
> where all the console/modem cables and BNC cables are attached.  At the bottom
> of that card I have RJ45 connection.  If I remove BNC cable (which is connect
> to an HP Hub and there are no DTCs) and use RJ45 cable to connect to HUB, what
> do I need to do or change so it will work?  I tried to simply disconnect BNC
> and connect via RJ45, but PCs that are connected to HP via HUB cant
> communicate (we are using Reflection VT/MGR for HP connections).
> Do I need to change some configuration or do I need to change something on
> the card itself?
> Thanks in advance to all the gurus who will respond!
>
> Thanks a lot
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *