cf0a = enter genesis = 1) cslt is bad and/or 2) tape drive is bad
if the drive that you pulled is NOT ldev 1, you might be able to bring the system up single-user, single-disk and make a
new cslt...but if you tape drive is bad...well... if the bad drive is ldev 1, see my next sentence...
get a call into your hw support people immediately and hopefully they can help you rescue this system.
folks -- you really do need to be making and verifying cslt's on a regular basis! with as old as our boxes (discs in
particular) are, these tapes are the only thing standing between you and a disaster.
- d
---
Donna Hofmeister
Allegro Consultants, Inc.
408-252-2330
> -----Original Message-----
> From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Mark Landin
> Sent: Wednesday, February 23, 2011 8:07 AM
> To: [log in to unmask]
> Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
>
> What LDEV was the disk configured as?
>
> On 2/23/11, Harpreet SINGH <[log in to unmask]> wrote:
> > Dear All,
> >
> > Many Thanks for the prompt replies and valuable suggestions. After
> > checking with the internal team and confirmed as of now we don't need more
> > space.
> >
> > So what I have did, I have removed the faulty disk from the storage , and
> > boot the server from old generated CSLT Tape.
> >
> > I am able to boot the server from tape.
> >
> > ISL > INSTALL
> >
> > Initialize memory manager complete
> > Beginning INSTALL...............
> >
> > (and it is keep hang on the same screen am not what is going on.)
> >
> > I have checked on the console status code shows CF0A
> >
> > With Warm Regards
> > =-=-=-=-=-=-=-=-=-=-=-=-=-
> > Harpreet Singh Chana
> >
> > Phone : (O) 6895 - 4326
> > Fax : (O) 6895 - 4991
> > =-=-=-=-=-=-=-=-=-=-=-=-=-
> > Please do not print this email unless it is absolutely necessary.
> >
> >
> > Notice
> > The information in this message is confidential and may be legally
> > privileged. It is intended solely for the addressee. Access to this
> > message by anyone else is unauthorized. If you are not the intended
> > recipient, any disclosure, copying or distribution of the message, or
> > any action taken by you in reliance on it, is prohibited and may be
> > unlawful. If you have received this message in error, please delete it
> > and contact the sender immediately. Thank you.
> >
> >
> >
> >
> >
> > John Lee
> > <[log in to unmask]
> > ET> To
> > Sent by: HP-3000 [log in to unmask]
> > Systems cc
> > Discussion
> > <[log in to unmask] Subject
> > TC.EDU> Re: [HP3000-L] Replacement of SE
> > Scsi to DF Scsi Storage.
> >
> > 02/23/2011 10:46
> > PM
> >
> >
> >
> > Please respond to
> > John Lee
> > <[log in to unmask]
> > ET>
> >
> >
> >
> >
> >
> >
> > Your 928 is likely very limited in I/O slots. The 28696A FWD
> > interface card uses a full height slot, which you may not have
> > available. If not, I question how much of a performance increase
> > you're going to see anyway. Sometimes using 2 SE slots to 2 backup
> > units works instead. Or HP did make a SE DLT drive for that unit...FWIW.
> >
> > John Lee
> > Still crazy after all these years
> >
> >
> >
> > At 06:19 PM 02/22/2011, Jack Connor wrote:
> >>HP part for the FWD card is 28696A.
> >>
> >>Depending on what storage you're going to use, you may want to make
> >>sure the f/w on the card is 3728 or later.
> >>
> >>jack
> >>
> >>-----Original Message-----
> >>From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On
> >>Behalf Of Al nizzardini
> >>Sent: Tuesday, February 22, 2011 7:00 PM
> >>To: [log in to unmask]
> >>Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
> >>
> >>Create new SLT then reload time. Also change the primary boot path.
> >>
> >>TIA,
> >>
> >>Al Nizzardini
> >>
> >>IT Technical Consultant
> >>for today, for tomorrow and beyond
> >>443-465-6205
> >>
> >>
> >>
> >>
> >>----- Original Message ----
> >>From: "Johnson, Tracy" <[log in to unmask]>
> >>To: [log in to unmask]
> >>Sent: Tue, February 22, 2011 6:51:18 PM
> >>Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
> >>
> >>Off the top of my head I can think of a few things:
> >>
> >>1) You'll need to add a DF card, if I guess correctly your 928 doesn't
> >>have one?
> >>
> >>2) Shut down and power down.
> >>
> >>3) Add a new DF card (a.k.a FW?) and new storage unit.
> >>
> >>4) Power up. Boot to ISL.
> >>
> >>5) Enter ODE, run MAPPER (or MAPPER2?).
> >>
> >>6) Read the path and model of the DF(FW?) card. Path and model of the
> >>new storage unit if also attached.
> >>
> >>7) Add the path of the new card in SYSGEN.
> >>
> >>8) Add the PSEUDO path in SYSGEN.
> >>
> >>9) Add the new LDEV desired of the new unit in SYSGEN.
> >>
> >>10) Reboot.
> >>
> >>If anyone thinks I missed something, correct me.
> >>
> >>Tracy Johnson
> >>Office 1-757-766-4318
> >>[log in to unmask]
> >>
> >>
> >> > -----Original Message-----
> >> > From: HP-3000 Systems Discussion
> >> > [mailto:[log in to unmask]] On Behalf Of Harpreet SINGH
> >> > Sent: Tuesday, February 22, 2011 6:17 PM
> >> > To: [log in to unmask]
> >> > Subject: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage.
> >> >
> >> > Dear All,
> >> >
> >> > I have a 928 server. Which is configured with SE Scsi
> >> > Storage Unit. All
> >> > Full backups and CSLT Tapes are generated on SE Scsi Storage.
> >> >
> >> > I would like to replace the SE Scsi Storage to DF Scsi.
> >> >
> >> > Please advise what are the instructions I have to follow. I
> >> > have rebuild
> >> > the system couple of time on the same storage but never
> >> > changed the Storage
> >> > Unit.
> >> >
> >> > With Warm Regards
> >> > =-=-=-=-=-=-=-=-=-=-=-=-=-
> >> > Harpreet Singh Chana
> >> >
> >> > Phone : (O) 6895 - 4326
> >> > Fax : (O) 6895 - 4991
> >> > =-=-=-=-=-=-=-=-=-=-=-=-=-
> >> >
> >>
> >>* To join/leave the list, search archives, change list settings, *
> >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >>
> >>
> >>
> >>
> >>
> >>* To join/leave the list, search archives, change list settings, *
> >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >>
> >>Be sure to ask us about short term and long term rentals on servers,
> >>workstations, storage and more!
> >>
> >>CONFIDENTIALITY NOTICE: This communication with its contents may
> >>contain confidential information. It is solely for the use of the
> >>intended recipient(s). Unauthorized interception, review, use or
> >>disclosure is prohibited and may violate applicable laws including
> >>the Electronic Communications Privacy Act. If you are not the
> >>intended recipient, please contact the sender and destroy all copies
> >>of the communication.
> >>
> >>* To join/leave the list, search archives, change list settings, *
> >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
> > ForwardSourceID:NT0019F80E
> >
> > * To join/leave the list, search archives, change list settings, *
> > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
> >
>
> --
> Sent from my mobile device
>
> "He's old enough to know what's right and young enough not to choose
> it. He's strong enough to win the world and weak enough to lose it." -
> Neal Peart
>
> * To join/leave the list, search archives, change list settings, *
> * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|