cf0a = enter genesis = 1) cslt is bad and/or 2) tape drive is bad if the drive that you pulled is NOT ldev 1, you might be able to bring the system up single-user, single-disk and make a new cslt...but if you tape drive is bad...well... if the bad drive is ldev 1, see my next sentence... get a call into your hw support people immediately and hopefully they can help you rescue this system. folks -- you really do need to be making and verifying cslt's on a regular basis! with as old as our boxes (discs in particular) are, these tapes are the only thing standing between you and a disaster. - d --- Donna Hofmeister Allegro Consultants, Inc. 408-252-2330 > -----Original Message----- > From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Mark Landin > Sent: Wednesday, February 23, 2011 8:07 AM > To: [log in to unmask] > Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage. > > What LDEV was the disk configured as? > > On 2/23/11, Harpreet SINGH <[log in to unmask]> wrote: > > Dear All, > > > > Many Thanks for the prompt replies and valuable suggestions. After > > checking with the internal team and confirmed as of now we don't need more > > space. > > > > So what I have did, I have removed the faulty disk from the storage , and > > boot the server from old generated CSLT Tape. > > > > I am able to boot the server from tape. > > > > ISL > INSTALL > > > > Initialize memory manager complete > > Beginning INSTALL............... > > > > (and it is keep hang on the same screen am not what is going on.) > > > > I have checked on the console status code shows CF0A > > > > With Warm Regards > > =-=-=-=-=-=-=-=-=-=-=-=-=- > > Harpreet Singh Chana > > > > Phone : (O) 6895 - 4326 > > Fax : (O) 6895 - 4991 > > =-=-=-=-=-=-=-=-=-=-=-=-=- > > Please do not print this email unless it is absolutely necessary. > > > > > > Notice > > The information in this message is confidential and may be legally > > privileged. It is intended solely for the addressee. Access to this > > message by anyone else is unauthorized. If you are not the intended > > recipient, any disclosure, copying or distribution of the message, or > > any action taken by you in reliance on it, is prohibited and may be > > unlawful. If you have received this message in error, please delete it > > and contact the sender immediately. Thank you. > > > > > > > > > > > > John Lee > > <[log in to unmask] > > ET> To > > Sent by: HP-3000 [log in to unmask] > > Systems cc > > Discussion > > <[log in to unmask] Subject > > TC.EDU> Re: [HP3000-L] Replacement of SE > > Scsi to DF Scsi Storage. > > > > 02/23/2011 10:46 > > PM > > > > > > > > Please respond to > > John Lee > > <[log in to unmask] > > ET> > > > > > > > > > > > > > > Your 928 is likely very limited in I/O slots. The 28696A FWD > > interface card uses a full height slot, which you may not have > > available. If not, I question how much of a performance increase > > you're going to see anyway. Sometimes using 2 SE slots to 2 backup > > units works instead. Or HP did make a SE DLT drive for that unit...FWIW. > > > > John Lee > > Still crazy after all these years > > > > > > > > At 06:19 PM 02/22/2011, Jack Connor wrote: > >>HP part for the FWD card is 28696A. > >> > >>Depending on what storage you're going to use, you may want to make > >>sure the f/w on the card is 3728 or later. > >> > >>jack > >> > >>-----Original Message----- > >>From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On > >>Behalf Of Al nizzardini > >>Sent: Tuesday, February 22, 2011 7:00 PM > >>To: [log in to unmask] > >>Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage. > >> > >>Create new SLT then reload time. Also change the primary boot path. > >> > >>TIA, > >> > >>Al Nizzardini > >> > >>IT Technical Consultant > >>for today, for tomorrow and beyond > >>443-465-6205 > >> > >> > >> > >> > >>----- Original Message ---- > >>From: "Johnson, Tracy" <[log in to unmask]> > >>To: [log in to unmask] > >>Sent: Tue, February 22, 2011 6:51:18 PM > >>Subject: Re: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage. > >> > >>Off the top of my head I can think of a few things: > >> > >>1) You'll need to add a DF card, if I guess correctly your 928 doesn't > >>have one? > >> > >>2) Shut down and power down. > >> > >>3) Add a new DF card (a.k.a FW?) and new storage unit. > >> > >>4) Power up. Boot to ISL. > >> > >>5) Enter ODE, run MAPPER (or MAPPER2?). > >> > >>6) Read the path and model of the DF(FW?) card. Path and model of the > >>new storage unit if also attached. > >> > >>7) Add the path of the new card in SYSGEN. > >> > >>8) Add the PSEUDO path in SYSGEN. > >> > >>9) Add the new LDEV desired of the new unit in SYSGEN. > >> > >>10) Reboot. > >> > >>If anyone thinks I missed something, correct me. > >> > >>Tracy Johnson > >>Office 1-757-766-4318 > >>[log in to unmask] > >> > >> > >> > -----Original Message----- > >> > From: HP-3000 Systems Discussion > >> > [mailto:[log in to unmask]] On Behalf Of Harpreet SINGH > >> > Sent: Tuesday, February 22, 2011 6:17 PM > >> > To: [log in to unmask] > >> > Subject: [HP3000-L] Replacement of SE Scsi to DF Scsi Storage. > >> > > >> > Dear All, > >> > > >> > I have a 928 server. Which is configured with SE Scsi > >> > Storage Unit. All > >> > Full backups and CSLT Tapes are generated on SE Scsi Storage. > >> > > >> > I would like to replace the SE Scsi Storage to DF Scsi. > >> > > >> > Please advise what are the instructions I have to follow. I > >> > have rebuild > >> > the system couple of time on the same storage but never > >> > changed the Storage > >> > Unit. > >> > > >> > With Warm Regards > >> > =-=-=-=-=-=-=-=-=-=-=-=-=- > >> > Harpreet Singh Chana > >> > > >> > Phone : (O) 6895 - 4326 > >> > Fax : (O) 6895 - 4991 > >> > =-=-=-=-=-=-=-=-=-=-=-=-=- > >> > > >> > >>* To join/leave the list, search archives, change list settings, * > >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html * > >> > >> > >> > >> > >> > >>* To join/leave the list, search archives, change list settings, * > >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html * > >> > >>Be sure to ask us about short term and long term rentals on servers, > >>workstations, storage and more! > >> > >>CONFIDENTIALITY NOTICE: This communication with its contents may > >>contain confidential information. It is solely for the use of the > >>intended recipient(s). Unauthorized interception, review, use or > >>disclosure is prohibited and may violate applicable laws including > >>the Electronic Communications Privacy Act. If you are not the > >>intended recipient, please contact the sender and destroy all copies > >>of the communication. > >> > >>* To join/leave the list, search archives, change list settings, * > >>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html * > > > > * To join/leave the list, search archives, change list settings, * > > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * > > > > ForwardSourceID:NT0019F80E > > > > * To join/leave the list, search archives, change list settings, * > > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * > > > > -- > Sent from my mobile device > > "He's old enough to know what's right and young enough not to choose > it. He's strong enough to win the world and weak enough to lose it." - > Neal Peart > > * To join/leave the list, search archives, change list settings, * > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *