Try adding the directives:

     snmp_enabled=false
     pjl_supported=false

to npconfig for this printer. I have no experience with this printer;
however, based on your information, I would expect it to print after you
make these changes (stop then restart the spooler to activate - you may also
want to consider power cycling the printer and DAC before trying to print
again). Let us know if this helps.

HTH,
John

> -----Original Message-----
> From: Taale Liereng [mailto:[log in to unmask]]
> Sent: Tuesday, November 14, 2000 1:47 AM
> To: [log in to unmask]
> Subject: [HP3000-L] printing to OCE 3145
>
>
> We have connected a OCE 3145 Digital Copier as a
> network-printer, 46 p.p.m.
>
> I have tried to connect it to HP3000 network printing but the
> printer does
> not respond.
>
> NO ERRORS on console when printing to the device, but
> spoolfile get status
> PRINT and there it hangs until printer is stopped (several
> minutes/hours !)
>
>
> Snmp & pjl is enabled in NPCONFIG.
> Ref technical doc. the printer/copier does support PCL
>
> ********
> Printer drivers & fonts
>
> PCL 5e
> Postscript Level II (optional)
> IPDS (optional)
> ********
>
> Responds when pinging from 3000.
>
> Printer/copier is connected through a Digital Access
> Controller (DAC)(an
> OCE unit, looks like a PC tower cabinet) . I guess its similar to a
> Jetdirectbox/other boxes.
>
>
> Anyone familiar with this printer ???
>