Hi Donna,
Neither device 6 nor 104 have printers attached so I guess output to lp
will never get anywhere :-(
This is Ok because i can file transfer the files and read them off-line
if desired.
We have 1 off 2934 connected to a serial port at device 111 and 2
printronix 500q's at IP addresses
<private>.181 and .178
which equates to devices 99 and 98 in npconfig.pub.sys
I tried to add an HP laserjet 2600N as device 228, on IP <private>.211
and then add device 228 to class lp2.
I hoped a 2600N would talk PCL well enough to work.
The new printer stayed at Ready and HDR, AWAITING EOD and refused to
talk.
quad
/t npconfig.pub.sys
/l all 1 99 (network_address = <private>.178
2 tcp_port_number = 9100
3 pjl_supported = true
4 snmp_enabled = false
5 jam_recovery = false
6 data_timeout = 30 )
7 98 (network_address = <private>.181
8 tcp_port_number = 9100
9 pjl_supported = true
10 snmp_enabled = false
11 jam_recovery = false
12 data_timeout = 30)
<snip>
19 228 (network_address = <private>.211
21 pjl_supported = true
22 snmp_enabled = false
23 jam_recovery = false
24 data_timeout = 30) # Despatch HP2600N
I have been digging around for some more useful information and tripped
over ioconfig's lc. This seems to suggest I have lots of printing
options but a lot of these have been removed over the decades.
ioconfig:lc
CLASSNAME MODE LDEV(S)
--------- ---- -------
TAPE ncio 7
DDUMP ncio 7
TAPE1 ncio 7
DISC random 3, 2, 1
SPOOL random 3, 2, 1
LP out 6, 104
LP1 out 6, 125
JOBTAPE ncio 10
CONSOLE cio 20
TERM cio 21
HPUPSDEV cio 22
NETLP out 80, 97, 99, 228
NETLP2 out 80
NETLP1 out 98
LP9 out 99
LP4 out 137
AKOFFPRT *****
HELP out 133
LP5 out 105
LPR1 out 207
LP3 out 115
LP6 *****
LPR2 out 217
LPR3 out 227
ISLMODEM cio 100
LP7 out 111
LP8 out 157
LP2 out 228
SO .. I guess I want to restart the lp2 print queue but point it
to a working printer first. I cannot use the existing printers because
they use special stationery.
Supersine:down 228
^
Device in use. DOWN pending. (CIWARN 3018)
Supersine:spooler lp2;show
LDEV DEV SPSTATE QSTATE OWNERSHIP SPOOLID JOB STEP
228 00000228 *STOP CLOSED OUT SPOOLER #O631199 HDR, WAIT FOR
EOD
I guess the *STOP means STOP pending
Supersine:spooler lp2;stop
SPOOLER ;STOP not performed on device 00000228. (CIWARN 4619)
Supersine:help abortio
<snip>
Supersine:abortio 228
Supersine:18:25/197/Output spooler, LDEV #228: The file system reported
a devic
e error
<snip>
18:25/197/Output spooler, LDEV #228: The spooler could not complete
output of file O631199.OUT.HPSPOOL.
Native Mode Spooler message 9511
18:25/197/Output spooler, LDEV #228: Stopped.
Following the lessons seen on the list so far ...
228 00000228 CLOSED NO SPOOLER
Supersine:up 228
Supersine:spooler 228;start
Supersine:18:30/168/Output spooler, LDEV #228: Started.
spooler lp2;show
LDEV DEV SPSTATE QSTATE OWNERSHIP SPOOLID JOB STEP
228 00000228 ACTIVE OPENED OUT SPOOLER #O631199 HDR, WAIT FOR
EOD
We are back at WAIT FOR EOD !?
Regards,
Tony
PS hopefully my paragraphic email disclaimer is now properly suppressed.
<snip useful education from Donna on how printers and spoolers co-exist>
* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
|