Hi All :)
   Ok... MPE/iX 6.5 PP2 with a serially connected (via DTC) 2563B (recently
moved from one floor to another)... started not reporting out of paper or
paper jam to the 3k...

   *I am told* that this printer would stop (Flashing 11) and wait for more
paper.... now it just happily prints everything whether there is paper or
not!  (did I miss anything on changes to the spooler?

NMMGR Info for this printer:
PATH:  DTS.PROFILE.LPX

Printer type              [26]  (18, 21, 22, or 26)
   or printer type file name [                          ]
Line speed              [9600 ]  (300, 1200, 2400, 4800, 9600, 19200, or
38400 bps)
Record width           [132 ]  (1... 2048 bytes)
Modem type            [0]  (0 - None, 1 - US, 2 - EU, 3 - Five wires,
                                  4 - US inout, 5 - EU inout )
Modem behavior        [0]  (0 - none, 1 - DCE, 2 - DTE, 3 - DCE high)
Data length/Parity      [NONE]  (None, Even, Odd, 0's, 1's, 8eve, 8odd)

Number of stop bits           [1] (1/2)
Hardware handshaking?  [N] (Y/N)     Initially spooled?   [Y] (Y/N)
Enable flow control?          [Y] (Y/N)     NLIO device?         [N] (Y/N)

   Device class   [LPX     ]  [PRINTER ]  [        ]  [        ]
                  [        ]  [        ]  [        ]  [        ]

:SPOOLER DEV=LPX;SHOW

LDEV  DEV       SPSTATE   QSTATE  OWNERSHIP    SPOOLID    JOB STEP
 501  00000501  ACTIVE    OPENED  OUT SPOOLER  #O8813     IN DATA

Thanks for any ideas/suggestions/cures/incantations/caliber to use for
shooting it....
Art "where did all those SFA's go? hehe" Bahrs