Forgive me for being thick, but the issue was stated:

> So here is the question: we run a program from Speedware called Designer, basically we create a 'new
> design' which in turn creates a DB based on that design, and continues. So on this new system via
> Reflection VT-MGR it 'hangs' when saving the new design

So I'm assuming that you can run Designer from both connections, i.e. 
you have a session and are running a program and that you create a 
"design" and that it is when the design is saved that the "hang" occurs?

It's far more likely to be one of the types of issues that donna or 
Kevin describe than any network issue.

I assume that Designer runs on the HP3000 not on the PC that uses 
Reflection to save the file back to the HP3000?

Alan



In message 
<[log in to unmask]>, John 
Rogers <[log in to unmask]> writes
>Ok, Alan, good point, however logged on to GSP as the same 
>user/password as on a VT-MGR session yields 2 different results, if it 
>were a security/group permission issue, it would exhibit the same 
>result in both places.
>
>Jack, interesting idea, GSP being telnet, is ONLY port 23, correct? and 
>assuming I connect to "LAN1" via vt-mgr (1570) and/or telnet (23) and 
>it 'connects' but Designer doesn't work seems to imply the 'firewall 
>ports' are open otherwise I would not even get to the front door no?
>
>That said, do you think designer is someone opening a different port to 
>do it's work? within Reflection, i seriously doubt it.
>
>
>Great responses, at least it's making me think, and thinking is 
>good..... I think.
>
>
>Cheers,
>
>John
>
>
>
>
>From the symptoms, John, it sounds like ports are open on the GSP IP 
>that aren't on the normal NIC/IP connection.
>Just a suggestion to check the actual switch/network settings for both 
>pathways to the 3K.
>jack
>
>
>-----Original Message-----
>From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On 
>Behalf Of John Rogers
>Sent: Friday, March 18, 2011 12:11 PM
>To: [log in to unmask]
>Subject: Re: [HP3000-L] Mpe: Speedwre and MPE
>
>Craig,
>
>Thanks for the quick response, let me clarify, we telnet to the HP's 
>LAN1, and the designer issue STILL occurs, if we telnet to GSP designer 
>works without issue. so the thought is still something inside the 
>NS3000 stack, as GSP lives outside of that.
>
>Comments welcomed.
>
>
>
>Raise a pint,
>
>John.
>
>************Original Message below *******************
>
>
>John,
>
>You say it works when you TELNET to the GSP.
>
>What happens when you TELNET to the HP3000?   Is it just the VT-MGR 
>connection that causes a problem?
>
>-Craig
>
>
>--- On Fri, 3/18/11, John Rogers <[log in to unmask]> wrote:
>
>From: John Rogers <[log in to unmask]>
>Subject: Mpe: Speedwre and MPE
>To: [log in to unmask]
>Date: Friday, March 18, 2011, 8:58 AM
>HP3000L Subscribers,
>
>We have an odd issue with one of our HP3000's
>We performed an install on a DR system utilizing the CSLT from our 
>current HP, so fairly standard.
>We have restored accounting structure, BULDACCT, UDCS etc.
>Restored all 'data' needed
>We can connect via network both Telnet and VT so functionally the 
>system is fine.
>Both systems are running MPE 7.5 at the same patch level, (NOT PP5) but 
>the patches should NOT come into play for this exercise.
>
>So here is the question: we run a program from Speedware called 
>Designer, basically we create a 'new design' which in turn creates a DB 
>based on that design, and continues. So on this new system via 
>Reflection VT-MGR it 'hangs' when saving the new design
>
>On the current production system there are NO problems running Designer.
>
>Here's the very bizarre issue, if we GSP to console, and attempt to run 
>Designer and create a new design it works WITHOUT issue, so we are 
>thinking it is somehow network 'within the HP' related.
>
>Any suggestions are greatly appreciated.
>
>Cheers,
>
>John
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>Call us today about our Windows consulting for monthly support 
>services, plus configurations and migrations.
>
>CONFIDENTIALITY NOTICE: This communication with its contents may 
>contain confidential information. It is solely for the use of the 
>intended recipient(s). Unauthorized interception, review, use or 
>disclosure is prohibited and may violate applicable laws including the 
>Electronic Communications Privacy Act. If you are not the intended 
>recipient, please contact the sender and destroy all copies of the 
>communication.
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *
>
>* To join/leave the list, search archives, change list settings, *
>* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *

-- 
Alan Yeo
[log in to unmask]    Just because you're paranoid
Phone +44 1684 291710   it doesn't mean someone isn't!.
Fax   +44 1684 291712

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *