When you replaced the disk drives, notice how their hardware path changed.

Now check what your PRI boot path is. that's where the CSLT will try to
install things. You will need to change your PRI boot path to the hardware
path of one of the new disks you put in. This will become LDEV 1.

On Wed, Feb 23, 2011 at 2:58 PM, Harpreet SINGH <
[log in to unmask]> wrote:

> Hi,
>
> I have managed to verify the CSLT Tape on working server and found no
> errors.
>
> I have taken out this working Tape drive from the working server in
> Replaced with the suspected faulty Tape drive.
>
> -- On server Side I have inserted two Disk in the disk enclosure.
> -- Restart the Server
> -- Search for the Hardware
> -- I found 3 devices
> i.e.
> -- P0   56/36.5         DISK
> --P1    56/36.6         DISK
> --P2    56/52/0         TAPE
>
> So I boot the server with bo p2
> Interact with IPL = N
>
> ISL > Install
>
> I got the messages
>
> Can't access disk at 56/52.5.0 ....
> System Abort 55 from Syb System 146
> Sec Status: info -31281, Subsystem = 213
> System Halt 7, $0037
> --
> "He's old enough to know what's right and young enough not to choose it.
> He's strong enough to win the world and weak enough to lose it." - Neal
> Peart
>

* To join/leave the list, search archives, change list settings, *
* etc., please visit http://raven.utc.edu/archives/hp3000-l.html *