Hi,

we implemented an EMC˛ SRDF configuration between a source  HP3000 and a
target HP3000 series 979.

The 979 target is daily working with HP disks
(Emc˛ disks in Readonly mode). In case of backup, we reboot it on Emc˛ disks
(not seeing HP disks: FW-SCSI cards are not defined in SYSGEN when using that
config group).

We recently read in an EMC˛ document that in case of backup
(using Emc˛ disks), we should have to disconnect the SCSI link of the HP
internal disks and unplug them. That seems to be crazy in case of emergency !
On the other hand, we rebooted the 979 system many times using Emc˛ disks
only without any trouble.

Does anybody use such a configuration ? Can
someone validate that information which was never provided to us by Emc˛
neither HP until today ?

If any, is that restriction to be applied to all
9x9 series or only for 959/969 series ?

Thanks to all for helping us on that
subject.

JM.


Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.