Message-ID: <907915212DF2D011BC180000F64A7590DE71F9@S0000MP1> From: Klaus Franke <[log in to unmask]> Reply-To: Klaus Franke <[log in to unmask]> To: [log in to unmask] Subject: AW: HELP: Cisco routers slow DTC 16RX performance Date: Tue, 18 Nov 1997 03:17:27 -0500 MIME-Version: 1.0 X-Mailer: Internet Mail Service (5.5.2232.9) Content-Type: text/plain Hi, some hints from my experiences: - i highly recommend to uses filtering together with bridging, because there could be many more packets going over the line, than you want to do so, configure your cisco's as follows: no bridge 1 acquire bridge 1 address 0800.09xx.xxxx forward BRI0 bridge 1 address 0800.09xx.xxxx forward Ethernet0 In this example, the only addresses i let pass the router are the hp3000 and the dtc. These few statements saved us a lot of trouble with 'unwanted' packets. Of course, you have to replace the xx.xxxx by the mac-addresses of the hp3000 and the dtc. Also, BRI0 may be wrong with you cisco 1005/36xx. To verify, if other addresses are currently forwarded, just enter the command 'show bridge' on the cisco command line. By the way: we are currently using a remote dtc16mx with cisco 1003 on both sides over a 64k isdn-line and the performance is as if it was in the same office! <snip> HELP: Cisco routers slow DTC 16RX performanc </snip>