According to the HP configuration guide, the Lanic must be in slot #1 of the expansion cage. I know the lanic is very sensitive to the card slot since I have one also. Try to move it. Rgds Mel Rees [log in to unmask] On Tue, 1 Dec 1998 00:02:17 -0500 , Aaron Christopher Finney <[log in to unmask]> wrote: >I finally got the console to come up using the freeware emulator. I do get >an error with the lanic card, but I'm hoping that it's just a no-media >type of error. I did, however, connect a transceiver with a loop-back >cable and got the same error. I see the led's flash on the transceiver for >an instant, but nothing after that - totally dead. > >What follows is my terminal output, maybe one of you kind souls can offer >some additional insight from it. If not, I'll wait until I get the HP-IB >cables and get the drives connected before filling up your mailboxes >again... > > >Power on Self Test >Memory Test passed >Number of banks = 16 >Slot 1 Channel 1 - Terminal Interface Controller >Slot 4 Channel 4 - Peripheral Interface Channel >Slot E1 Channel 9 - Terminal Interface Controller >Slot E3 Channel 11 - Terminal Interface Controller >Slot E5 Channel 13 - Local Area Network Interface Controller failure >002E >Cannot Auto-Warmstart because of I/O card failure > >3-REMOTE >H for help->TE > > >ROM Versions:1.2444 2.2444 3.2444 4.2444 > >Selftest Menu: > >AL[l] [ count ] >CH[an] [ count [ ,chan ] ] >CP[u] [ count ] >E[xit] >I[omap] [ count ] >M[emory] [ count ] >PON [ count ] > >3-REMOTE >Test ->AL > > TOC RAM >Addr Data >0008 0000 >0009 0016 >000A 0022 >000B 0020 >000C 0025 >000D 000D >000E 00FF >000F 00FF >Observe LED display cycle 0-F >CPU test passed >Memory Test passed >Cannot test console TIC in REMOTE or LOCAL(from REMOTE) >Slot 4 Channel 4 - Peripheral Interface Channel >Slot E1 Channel 9 - Terminal Interface Controller >Slot E3 Channel 11 - Terminal Interface Controller >Slot E5 Channel 13 - Local Area Network Interface Controller failure >002E >Test Failed > System I/O Configuration >---------------------------------------------------------------------- >Number of banks = 16 >Load: Channel 4 Device 5 >Start/Dump: Channel 4 Device 0 >---------------------------------------------------------------------- >Slot 1 Channel 1 ID=4 - Terminal Interface Controller >---------------------------------------------------------------------- >Slot 4 Channel 4 ID=2 - Peripheral Interface Channel > Device 4 ID=4003 - Intelligent Network Processor >---------------------------------------------------------------------- >Slot E1 Channel 9 ID=4 - Terminal Interface Controller >---------------------------------------------------------------------- >Slot E3 Channel 11 ID=4 - Terminal Interface Controller >---------------------------------------------------------------------- >Slot E5 Channel 13 ID=8 - Local Area Network Interface Controller >---------------------------------------------------------------------- > >3-REMOTE >Test -> > > >Thanks again, everyone. > >Aaron > > > >Aaron C. Finney Systems Administrator WFI Incorporated >------------------------------------------------------------------------ >"UNIX is an exponential algorithm with a seductively small constant." >