In <[log in to unmask]> [log in to unmask] writes: > If the "hold down eject button for a minute or so" trick doesn't work, > there is another alternative - although I would not advise the > weak-of-heart to try it - but here goes. > > The only other solution to this problem is to cycle power on the DDS drive. > This CAN be done without re-booting the system. > > To do so requires you to simply remove the power cable from the device and > re-attach it. The hard part of this excercise is accessing the power cable. [snip] > I've done this exercise twice and am still here to speak about it - so it > does work. We've done this a couple times on the DDS in our 922 system... But then we tried it again [for the last time I might add] just a few weeks ago and this time it did halt the system (and we WERE careful). Caveat Emptor. -Chris "remove nospam" Bartram