Hi gang - I am having a problem with getting information out of nettool similar to the netstat command on unix. On this system, I have three Internet gateway's configured. Two are to specific networks and the third includes some specific networks as well as the default network. The nmmgr entry for the last one is: -------------------------------------------------------------- NMMGR/3000 (B.06.00) #158 Neighbor Gateway Reachable Networks Data: Y When Data Flag is "N", press "Save Data" to create the data record. Command: Path: NETXPORT.NI.LAN1.INTERNET.IP163 [C 192.023.001 163] Neighbor Gateway IP Internet Address Configured Reachable Networks IP Network Address IP Mask (Optional) Hops [B 172.016 001.000] [255.255.255.000] [1 ] [B 172.016 002.000] [255.255.255.000] [1 ] [B 172.016 008.000] [255.255.255.000] [3 ] [B 172.016 006.000] [255.255.255.000] [3 ] [B 172.016 004.000] [255.255.255.000] [3 ] [B 172.016 011.000] [255.255.255.000] [1 ] [B 172.016 012.000] [255.255.255.000] [1 ] [@ ] [ ] [1 ] [ ] [ ] [ ] [ ] [ ] [ ] File: NMCONFIG.PUB.SYS PAGE 1 -------------------------------------------------------------- The problem in nettool is that the [name][route][route] command shows all of the redirects to our firewall. Also, it only shows 50 entries. I then say, ok let me just list the entries for this gateway (192.23.1.163). I get no entries shown. The the fact that there are 50 entires in the table. Are there anyway to show more entries. The entries must be out there, or the "data" won't route. I have a call into HP regarding showing the default route like the netstat command, but have gotten little help. That is why I am turning to the list. James H. from HP - Does this ring any bells? Thanks a lot /alan [log in to unmask] ==================nettool output below======================= :nettool.net NETTOOL Version: B0509000 Enter HELP HELP for an explanation of the help facility. Enter HELP OPERATION for guidance on NETTOOL use. Commands can be abbreviated, HELP keywords cannot. Menu-specific commands for the ROOT: RESOURCE CONFIG NAMEADDR PING STATUS NMDUMP X25STAT X25CHECK IPCINT XPVAL XPPERF QVALNS NSTEST LOOPINIT NSLOGON SOCKINFO filters [1]>>>name CACHE MAPPINGS ROUTING PATH filters [2]NAMEADDR>>>rout ROUTING DELROUTING TOTALS filters networkfilter gatewayfilter [3]NAMEADDR.ROUTING>>>rout Network address filter: @ Gateway address filter: @ Network number Subnet mask Gateway Hops Flags ______________________________________________________________ 38.241.117.0 255.255.255.0 192.23.1.253 200 2 128.8.10.0 255.255.255.0 192.23.1.253 200 2 128.8.170.0 255.255.255.0 192.23.1.253 200 2 128.118.30.0 255.255.255.0 192.23.1.253 200 2 128.173.16.0 255.255.255.0 192.23.1.253 200 2 128.183.7.0 255.255.255.0 192.23.1.253 200 2 [snip entries...there are a total of 50 entries listed] 143.172.1.0 255.255.255.0 192.23.1.253 200 2 143.233.245.0 255.255.255.0 192.23.1.253 200 2 144.81.97.0 255.255.255.0 192.23.1.253 200 2 ______________________________________________________________ Total number of routings = 50 [4]NAMEADDR.ROUTING>>>gate Gateway IP address:192.23.1.163 [6]NAMEADDR.ROUTING>>>rout Network address filter: @ Gateway address filter: 192.23.1.163 Network number Subnet mask Gateway Hops Flags ______________________________________________________________ ______________________________________________________________ Total number of routings = 50 [7]NAMEADDR.ROUTING>>> ------------------------------------------------------------