Did this message make it to its intended recipients ? I haven't seen it come back through on the mailing lit. Chris. _____________________________________ Christopher Davey Technical Manager, Colonial IS Technical Services 5/353 Lt Collins St Melbourne Victoria Australia ph : (+61 3) 9200 6103 fax: (+61 3) 9200 1090 mailto:[log in to unmask] ___________________________________ >---------- >From: Davey, Chris >Sent: Wednesday, 1 October 1997 9:01 >To: 'Juan Criel' >Cc: 'HP3000-L posts' >Subject: RE: Increase VT service > > As I remember there are two things you need to do: > >(a) in NMMGR, go to the screen NETXPORT.GPROT.TCP and update the 'maximum >number of connections' entry. You will need to call NETCONTROL >UPDATE;NET=network name (e.g. LAN1) for this to take effect. I don't remember >when we did this if we did it during the day or if it affected users >currently logged on; > >(b) when this has taken effect, call NSCONTROL SERVER=VTSERVER,0,new-max >(1200 in our case). > >One thing to watch out for is that the system reverts to the 300 default >limit after every reboot, so you will need to do this (the NSCONTROL >SERVER=..... command that is) each time the system is rebooted. This can't be >in SYSSTART, so you will need to amend the job which you probably stream from >SYSSTART to add this call. > >The relevant NMMGR screeen is below, you can reach it by Open >Config/NS/Unguided/Netxport/Gprot/TCP. > >Best of luck. > >Chris. > > >NMMGR/3000 (B.04.07) #94 Transmission Control Protocol (TCP) Config Data: Y >When Data Flag is "N", press "Save Data" to create the data record. >Command: > >Path: NETXPORT.GPROT.TCP > >[N] Checksum Enabled (Y For Yes, N For No) > >[1200] Maximum Number of Connections > >[10 ] Retransmission Interval Lower Bound (Secs) >[360 ] Maximum Time to Wait For Remote Response (Sec) >[10 ] Initial Retransmission Interval (Secs) >[4 ] Maximum Retransmissions per Packet > >[900 ] Connection Assurance Interval (Secs) >[8 ] Maximum Connection Assurance Retransmissions > > >File: NMCONFIG.PUB.SYS > > Save Help >Prior > Data >Screen > > >__________________________ >Christopher Davey >Technical Manager, Colonial IS Technical Services >5/353 Lt Collins St Melbourne >Victoria 3000 Australia > >ph : (+ 61 3) 9200 6103 >fax: (+61 3) 9200 1090 > >mailto:[log in to unmask] > > >___________________________ > >---------- >From: Juan Criel[SMTP:[log in to unmask]] >Sent: Wednesday, 1 October 1997 6:58 >To: [log in to unmask] >Subject: Increase VT service > >Hi all.... > >I have just reached my maximum VT Service limit of 300. If you issue a >NSCONTROL STATUS, it tells you the MIN and MAX. How do I increase this >value? Can I do it on the fly? I'm reading a bunch of NS manuals and >can't find it. > >Thanks!! >Juan > >