Jim said.... > > But that's only on Slot 0. On Slot 1, I get no prompt. Pressing > return just results in the terminal's cursor doing a CR/LF and > going to the next line. I saw this before when I misconfigured the > terminal profile as modem instead of direct connect, so I double- > checked the profiles and they are correct. I tried reseating the > Slot 1 card from the back of the unit, but to no avail. The vendor > is going to send me a new Slot 1 card, but what say you? > > Anyway, 50% isn't so bad, especially since I only need 6 ports or > so right now. > > Jim Phillips Manager of Information Systems > Voice: (915) 860-9933 Therm-O-Link of Texas, Inc. > Fax: (915) 860-9936 1295 Henry Brennan > Email: [log in to unmask] El Paso, Texas 79936 I just read your message that you got it all working, but I wanted to comment on another potential problem when the cursor does a CR/LF. We have seen this when we have had less than good communication between the DTC and the HP. Normally this happens over an ISDN line with some so-so bridges. Glad to hear that the next step in the saga is complete. I can't wait for the next installment. :-> /alan [log in to unmask]