I'm having intermittent problems printing to a LaserJet 4si using an internal JetDirect Card from a 967sx. The problem appears sometimes when we print a long report (100 to 200 pages). The report stops somewhere in the middle and restarts from the beginning. It may do this a few times before the report actually finishes completely. The route from the 3000 to the printer is a follows: ThinLan to a 10BaseT Converter to a 3com LanPlex 2500 Switch to a 3com Hub to another 3com hub via Fiber (500 feet) to the JetDirect Card I have pinged it (was punged ???) from the 3000 with the following results: 1000 pings, 1024 bytes, no lost packets Min 7ms, Ave 10ms, Max 232ms I tried to ping with 2048 bytes, but never get a reply ?????? I tried 2048 byte to other JetDirect cards, also with no reply. I have tried printing to a closer printer (does not hit the fiber) and the few tests I did were OK. I have seen the following message several times on my console, but can not try it to a error on the printer: ** NS/3000 NetIPC ERROR IN VT; Job: 0; PIN: 338; Info: 1 - Error: 42; I sent a special forms message to the printer and the PIN does not match the above, so they may not be related. This is the only printer we use from the 967 to the JetDirect except for a few tests. The NPConfig file is as follows: global (setup_file=reset.setup banner_header = FALSE banner_trailer = FALSE) 50 (network_address = 192.168.115.205) 51 (network_address = 192.168.115.207) 52 (network_address = 192.168.115.206) 53 (network_address = 192.168.115.202) I have not yet tried HP Support, but may soon. I am only receiving this list in Digest format, so if you could reply to both me and the list I would greatly appreciate it. Thanks in Advance Steve Murphy [log in to unmask] Salem Division - Salem IL. World Color