In a message dated 96-07-03 00:48:57 EDT, [log in to unmask] (Patrick Stirrat) writes: << We have a 2563 printer with a serial interface. We have two questions, and no one seems to be able to give us a straight answer on either point: 1) we would like to set the default print pitch so it prints 16.7 cpi on all printouts. We have the software escape codes to do this on a per- printout basis, but we want to set this to be the default through the printers' control panel. 2) the printer is currently connected to an HP3000/928. can this printer be connected to a PC or PC network? If so, what driver should be used, and are there any settings that need to be set on the printer itself? Will a standard serial cable work? If anyone has any information it would be appreciated. >> I can answer #2 for you knowing that this works since I set up a 2563 to a PC that dialed in from our CA warehouse using a script file and printed off sales orders to be shipped. Try using the HP PaintJet driver. Yes, Paintjet.... Not really sure of the settings, but I could research if necessary. Rick Clark P/A for WW&R