Michael Hopper wrote:
>
> I'm new to the world of the HP3000s but am learning more and more every
> day.  (Will be taking the system managers course in a few weeks.)
> So this may be a dumb question, but....
>
> We've added a new DTC with 6 slots for 8 port cards.
> Only three of the cards have been installed, but all six have been
> configured system-wise.  Each of the new ports are now configured at
> 9600, but they need to be 19200.  (An oversite at installation time.)
>
> Now, when we reconfigure the DTC in NMMGR, does the whole machine need
> to be brought down and back up, or can you just power-cycle the DTC?
> Where is the DTC getting it's config information during
> powerup/download?
>
> -Mike-The entire system must be rebooted. After the reboot you must also power
cycle the DTC to force the download of the new configuration to that DTC.
So the answer is...both.
--
Mike Farrell
Intermountain Gas Company
Data Center Operations Supervisor
555 South Cole Road
Boise,  ID  83707