This is a multi-part message in MIME format. ---------------------------------29994898415836 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=us-ascii "Gary L. Paveza, Jr." <[log in to unmask]> wrote: >Our DTC Manager is logging errors on one of our DTCs and I can't seem >to find the manual that would have the error codes in it (normal sys >admin on vaction). > >The error is Class 3 (non-critical) Severity 7 Code 1289. If anyone >can tell me what this error is I would appreciate it much. It is >flagging the LAN card and is reporting about 3 errors a second (yes..a >second). Everything seems to be working fine, but it is getting >annoying having logs fill up every 10 minutes or so. That seems to be a known symtom, please check the following: 1) SQE heartbeat MUST be set on any tranceiver used with the DTC, and 2) Missing heartbeat causes many EVENT 1289 messages to be logged if any classes besides 1 are configured for logging on the DTC. Good luck Stephan Lelleck HP Germany ---------------------------------29994898415836 Content-Transfer-Encoding: 7bit Content-Type: text/plain From: "Gary L. Paveza, Jr." <[log in to unmask]> Reply-To: "Gary L. Paveza, Jr." <[log in to unmask]> Newsgroups: comp.sys.hp.mpe Subject: HP Openview and DTCs Date: Wed, 26 Jul 1995 11:25:05 -0700 Message-ID: <[log in to unmask]> Hi all, Our DTC Manager is logging errors on one of our DTCs and I can't seem to find the manual that would have the error codes in it (normal sys admin on vaction). The error is Class 3 (non-critical) Severity 7 Code 1289. If anyone can tell me what this error is I would appreciate it much. It is flagging the LAN card and is reporting about 3 errors a second (yes..a second). Everything seems to be working fine, but it is getting annoying having logs fill up every 10 minutes or so. TIA Gary Paveza ---------------------------------29994898415836--