Item Subject: Message text > Hello everyone. Our users who are dialing up through a DTC48 (PC Based mgt) > currently type "Bye" from MPE/ix which appears to drop connection between > our HP and the DTC; however they must type "L" to logoff which appears to > drop the connection from DTC modem port to remote modem. > > Can anyone elaborate on the technicalities of the connection points and > options for a config that would only require 1 terminate signal from remote > user rather than 2 (bye, L)? > > As always thanks in advance for any feedback! > > Stephanie Evich, University of MI, M-care > [log in to unmask] Hi Stephanie, Your problem is due to the port being configured in the OV/DTCMGR as "Enable Switching", and hense is a non-nailed device. If you nail the port to a specific system and disable switching then everything should work fine. Cheers, +----------------------------------+----------------------------------+ Isaac Blake | My opinions are just that! City of Tempe, Arizona | Telephone: 602.350.8218 Information Systems Division | FAX: 602.350.8366 120 East Fifth Street | E-mail: [log in to unmask] Tempe, AZ 85281-3797 (USA) | CompuServe: 76047,152 +----------------------------------+----------------------------------+