I use a very simple method to do call detail recording on my HP3000. I connected the output printer port (log device) on my MITEL telephone switch an HP3000 DTC serial port. I used only pins 2 and 7 (Receive data and Signal ground). Ross Scrogs taught me this- if you use the Send pin (3) you may send an XOFF and hang up the phone system- I would rathe loose data. (I may be wrong on pins 2 & 3 they may be reversed) I then run FCOPY to log the data comeing in from the PBX to a file. It now is very simple to produce all sorts of reports. If you want the full details, I could send them to you. My phone is FAX is 215-643-6960 - Att: Bob Meissner. I dont check my Internet to often- I get sucked into reading all the mail. On Thu, 26 Jan 1995, Phil ESGUERRA wrote: > Hello again! > > We're looking for a TELEPHONE ACCOUNTING SOFTWARE that runs in the > HP3000. I know that there are some out there, for I saw their ads > at one time. > > This software will be installed in the HP3000, which is connected > to the PBX. We want to be able to create reports out of the call records > created. The reports will show telephone usage, by extension, how long > the call took, the called number, and the phone charges, among others. > > If you are using, or know of a package, similar to the one described, > please e-mail me. If you are currently using one, please relay your > experiences, too. > > If there is any additional interest, I will post results. Thanks. > > > [log in to unmask] >