snmp = false - d --- Donna Hofmeister Allegro Consultants, Inc. 408-252-2330 > -----Original Message----- > From: Tom Hula [mailto:[log in to unmask]] > Sent: Monday, October 03, 2011 7:36 AM > To: Donna Hofmeister; [log in to unmask] > Subject: Re: [HP3000-L] Another HP Printer Puzzle > > I will try that and see how that works tomorrow. So, you want me to try > taking > out the jam line...on the snmp, do you mean snmp_enabled = false or true? > Tom > > -----Original Message----- > From: donna hofmeister > Sent: Monday, October 03, 2011 10:16 AM > To: [log in to unmask] > Subject: Re: [HP3000-L] Another HP Printer Puzzle > > Try taking about the jam line and stick in the snmp line. Be sure to stop > the spooler for this printer while you're > editing npconfig. - d > > --- > Donna Hofmeister > Allegro Consultants, Inc. > 408-252-2330 > > > > -----Original Message----- > > From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf > > Of Tom Hula > > Sent: Monday, October 03, 2011 7:13 AM > > To: [log in to unmask] > > Subject: Re: [HP3000-L] Another HP Printer Puzzle > > > > I can check for that tomorrow. As far as I know, there are no requests. It > > definitely isn't setup as a form > > and the out priority is higher than the fence, as evidenced by the fact > > that > > simply stopping and starting > > the spooler gets the spool file printing. > > > > I can have this file directed elsewhere, like to our Ricoh Copier with the > > same jobstream and it works > > as it should. > > > > The NPCONFIG for the printer looks thusly: > > 1002 (network_address = 192.168.100.117 # Laserjet P3015 - SCOTT > > setup_file = PCLELITD.HPENV.SYS > > pjl_supported = FALSE > > jam_recovery = TRUE > > banner_intray = 0 > > data_intray = 0) > > > > I'm not exactly sure now, what is in that setup file or why I chose it > > eons > > ago. > > > > Tom > > > > -----Original Message----- > > From: Francois Desrochers > > Sent: Monday, October 03, 2011 9:50 AM > > To: Tom Hula > > Subject: RE: [HP3000-L] Another HP Printer Puzzle > > > > Tom, > > > > Any outstanding reply on the console? > > > > François > > > > -----Message d'origine----- > > De : HP-3000 Systems Discussion [mailto:[log in to unmask]] De la part > > de Tom Hula > > Envoyé : Monday, October 03, 2011 9:31 AM > > À : [log in to unmask] > > Objet : [HP3000-L] Another HP Printer Puzzle > > > > This is the HP P3015dn printer that was automatically duplexing on 2 > > reports...that is no longer an issue. > > > > However, I do have an anomaly of sorts. > > > > Every day, since we have put that printer into production, one of those > > reports > > I had auto duplexing issue on is generated on the 3000, but not printing. > > > > At first, I thought it was that a temporary networking issue, > > but it happens every day...to just that report in that single job. > > > > All I have to do is stop and start the spooler and it prints just fine. > > > > If I use an option to reprint that report on the menu, which runs the same > > program, > > it always prints. > > > > The print file doesn't appear to be deferred. It just sits there, waiting > > for the bus to go by. > > > > Anyone encounter anything like this before? > > > > Tom Hula > > Victor S. Barnes Company > > > > * To join/leave the list, search archives, change list settings, * > > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * > > > > * To join/leave the list, search archives, change list settings, * > > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * > > * To join/leave the list, search archives, change list settings, * > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *