Also, what kind of SCSI enclosure are you using for the 9GB drive? And keep the SCSI cable as short as possible. Denys -----Original Message----- From: HP-3000 Systems Discussion [mailto:[log in to unmask]] On Behalf Of Mark Wonsil Sent: Saturday, March 04, 2006 6:28 AM To: [log in to unmask] Subject: Re: [HP3000-L] Calling all disc jockeys (SCSI) > Can you see the "other" drives 1,2 after the reboot? Yes. The system boots exactly the same as before - fully functional. > On the drive is there a termination jumper, you may need to remove it. We'll check that out. There is a SCSI terminator on the enclosure (and we switched the cable and terminator for the heck of it too...) > I believe the pseudo path should be 56/52.4 and ldev 4 should be 56/52.4.0. I'm sorry. That was a type on my part. The path is indeed 56/42.4 and the device is 56/52.4.0. We'll check for a terminator on the drive itself as well as running mapper without the drive attached some time this weekend. Thanks everyone for the pointers. Mark W. * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *