I opened an HP Case for my problem... Because the network is plugged , we have a DHCP srv., and the driver is found : C:\WINDOWS\system32>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : your-0ihdmmwz2s Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet Physical Address. . . . . . . . . : 00-XX-6E-XX-9A-XX -------------------------------------------------- "Broadcom NetXtreme Gigabit Ethernet" mean W2K3 found the driver, right? Sincerely, Jérôme Belgium "Robert Klute" <[log in to unmask]> wrote in message news:v8etv0lr74otpa37pa5cviscrrd76vkfsk@4ax.com... > On Mon, 31 Jan 2005 19:15:19 +0100, "DJe" <[log in to unmask]> wrote: > >>I found on HP website the document : "Configuring Microsoft® Windows® >>Server >>2003 on the HP Integrity Server, Enterprise Edition" ( c00090141.pdf ) ... >> >>I installed W2K3 trought lan - MP, and when it's installed, i try to set >>the >>ip address with SAC, i've >>the message :"SAC could not set the IP Address."... >>" >>SAC>I >>Net: 2, Ip=0.0.0.0 Subnet=0.0.0.0 Gateway=0.0.0.0 >>SAC>I 2 10.100.13.136 255.255.254.0 10.100.13.253 >>SAC could not set the IP Address. >>SAC>i 0 10.100.13.136 255.255.255.0 10.100.13.253 >>SAC could not clear the existing IP Address. >>SAC>i 1 10.100.13.136 255.255.255.0 10.100.13.253 >>SAC could not retrieve the IP Address. >>SAC> >>" >>---------------------------------------------------------- >>and from CMD : >>" >>C:\WINDOWS\system32>ipconfig >>Windows IP Configuration >>Ethernet adapter Local Area Connection: >> Media State . . . . . . . . . . . : Media disconnected > > You need to have the Ethernet adapter plugged into an active hub or > switch. If your site supports DHCP, then you should see a DHCP address > on "Net: 2", otherwise you will see a '169' address on "Net: 2". You > can now use the "I" command on the SAC to set the IP address. > > Remember, this IP address is only temporary. You will need to RDP into > the system and permanently set it. * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *