I found on HP website the document : "Configuring Microsoft® Windows® Server 2003 on the HP Integrity Server, Enterprise Edition" ( c00090141.pdf ) ... I installed W2K3 trought lan - MP, and when it's installed, i try to set the ip address with SAC, i've the message :"SAC could not set the IP Address."... " SAC>I Net: 2, Ip=0.0.0.0 Subnet=0.0.0.0 Gateway=0.0.0.0 SAC>I 2 10.100.13.136 255.255.254.0 10.100.13.253 SAC could not set the IP Address. SAC>i 0 10.100.13.136 255.255.255.0 10.100.13.253 SAC could not clear the existing IP Address. SAC>i 1 10.100.13.136 255.255.255.0 10.100.13.253 SAC could not retrieve the IP Address. SAC> " ---------------------------------------------------------- and from CMD : " C:\WINDOWS\system32>ipconfig Windows IP Configuration Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected C:\WINDOWS\system32>ipconfig /renew #to see if it can reach the DHCP server... Windows IP Configuration No operation can be performed on Local Area Connection while it has its media disconnected. C:\WINDOWS\system32>route print IPv4 Route Table ========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 XX 6e XX 9a XX ...... Broadcom NetXtreme Gigabit Ethernet ========================================================================== ========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 255.255.255.255 255.255.255.255 255.255.255.255 10003 1 ========================================================================== Persistent Routes: None C:\WINDOWS\system32> " ---------------------------------------------------------- Driver Broadcom NetXtreme Gigabit Ethernet found... OK Mac add. - Cable is connected!!! This is operational with HP-UX OS. ---------------------------------------------------------- I'll try a new installation, but i'm afraid to have the same msg... Does anyone have an idea? Sincerely, Jérôme Belgium * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *