Your parms for DEVCTRL are not quite correct. It should be : print devctrl.mpexl.telesup parm Dev, Compression="Nochange", Eject="Nochange", Load="Nochange" Comment ************************************************** Comment Comment Devctrl (Device Control Command) Comment Comment Parameter List: Comment Comment LDev - Logical Device Number (Required) Comment Comment Compress - [Enable | Disable | Nochange] Comment Comment Eject - [Enable | Disable | Nochange] Comment Comment Load - [Online | Offline | Nochange] Comment Comment ************************************************** HTH, Brian Donaldson. On Wed, 22 Sep 2004 09:54:47 +0300, Murli <[log in to unmask]> wrote: >Dear All, > >I am trying to use one of these drives in HP 3000 MODEL 996/100 :- > >C1537-00485 >C1537-10485 >C1537-20485 > >In SYSGEN, I have tried with IDs HP1504B & HP1537A > >I am able to configure and Store files on these drives, but after every >STORE operation, >the tape is ejected which is not as per requirement. > >I have used the command > >DEVCTRL.MPEXL.TELESUP DEV=7 EJECT=DISABLE LOAD=ONLINE > >Even after using this command, I get the same problem of EJECT. > >Can anyone help me in this ? > >Regards >Murali Iyer >ACS Ltd >KSA > >* To join/leave the list, search archives, change list settings, * >* etc., please visit http://raven.utc.edu/archives/hp3000-l.html * * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *