Christian wrote: >Yeah, that's right, all NEWER HP3000s are crippled. Exactly >since the 918 was introduced, waaaaaaay back in '94, as a >34-MHz crippled version of the original 48 MHz 928 (a.k.a. E25). > >Since HP3000 stopped selling last october, I'm quite baffled >at the notion of a **NEWER** HP3000. A less ancient one, perhaps ? As spelled out in writing by HP in their 9/01 edition of the HP e3000 Servers Configuration Guide: 'The clock speeds of the A400, A500, N4000-100-220, N4000-100-330, 918RX, 929KS/030 and 939KS/030 are affected with software.' My note: Keep in mind that newer N4000 systems like the 440, 550, and 750 are NOT slowed down by software as those are the rated speed of the processor used. Since the printing of this guide the N4000-xxx-380 systems also used software to affectively reduce the rated mhz from the native chip mhz (750mhz) installed in the system. My .02: Who cares how they created a system of a particular speed. They can do it by fabricating a chip at a particular mhz rating or they can do it by taking a faster already fabbed chip and slowing it down. It turns out to be a lot cheaper to do it software so that probably allowed more options to be made available within the limited budget available to csy. And please don't mention the a400-110 system. That box was NEVER a 110mhz system regardless of what HP said. It's actual cpu mhz rating is roughly 55mhz. Timings of the newer a400-150 system show it to be more like 120mhz. Not as far off as the older 110 model but still a tad short :-) Sorry for continuing to post technical information. I understand how everyone is probably missing their 'OT' posts... duane * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *