Hum... The old EX Plus ? What kind of cable do you use between EX Plus and LJ2200 ? I ***think*** there was a setting in JD EX+ to enable/disable bi-directional printing... Maybe you could look at it... Hope this helps ! -- ========================================= Denis (Remove "removeit." from email address) ========================================= "SURFboard" <[log in to unmask]> wrote in message news:3FCDA49D.255F886E@xsc.org... > I connected the HP LaserJet 2200 to the external HP JetDirect EX Plus > (J2591A) print server. The HP printer wizzard installer detected the > printer attached to the JetDirect EX Plus, however, it can't even do > test print nor any printing. Is there incompatibility with the > JetDirect EX Plus and LaserJet 2200? > > I tried a borrowed JetDirect 300X with the same printer and it print > okay but not with the EX Plus. > > I already did several reset to factory default (press test button for at > least 15 seconds while powering on), I can telnet to the JetDirect EX > Plus and also can view the settings using the Web JetAdmin but I can't > make the LaserJet 2200 work with it. Anyone? > * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *