Kurt asks: > I want to add a DDS-2 Drive to our 918/LX which already has > 2 disks and 1 DDS-1 (C1504) connected. > > I have to set the jumpers on the DDS-2 to set the SCSI address correctly. > (I know how to set the jumpers to obtain a needed SCSI address). > > How can I find out which SCSI addresses are already used by the DDS-1 > the discs WITHOUT removing the drives to inspect the jumpers? > > How do I have to set the PATH variable in Sysgen, io, adev to match > the new SCSI address of the DDS-2? > > From the actual PATH values of the discs and the DDS-1 in > Sysgen, io, ldev > I cannot see the mapping logics from SCSI address to PATH values ... > > Any help will be greatly appreciated. Thanks. To which I reply curtly: the information you want is displayed when you run SYSINFO.PRVXL.TELESUP: ======================================= :sysinfo.prvxl.telesup -------------------------------------------------------------------------- SysInfo_XL (A.05.00) cm2 10.98 MPE XL - HP3000 System Support Tool SUN, JUL 13, 2003, 8:20 AM Copyright Hewlett Packard Co. 1989 SysInfo_XL is designed for use by Hewlett Packard Support personnel only. HP IS NOT LIABLE FOR DAMAGES RESULTING FROM UNAUTHORIZED USE -------------------------------------------------------------------------- System Information as of SUN, JUL 13, 2003, 8:20 AM MPEXL HP31900C.25.06 OS: C.65.00 User Version: C.65.00 CPU Model: SERIES 918LX Memory : 128 Mb CPU ID : 1159116381 ($4516B65D) Single Processor Limited to 8 Users )io ------------------------- IO Configuration ------------------------- Highest Ldev: 311 Ldev Path Device Type Device ID Device Mgr Class Name 1 56/52.5.0 Disk HPC2247M1 SCSI_DISC_DM DISC SPOOL 2 56/52.6.0 Disk HPC2247M1 SCSI_DISC_DM DISC SPOOL 3 Terminal SubClass 8 6 56/52.8.0 Serial Printer HP2567B SCSI_DISC_DM 7 56/52.0.0 Tape HPC1503B SCSI_TAPE_DM TAPE DDUMP TAPE1 10 56/52.9.0 Tape HPC1503B SCSI_TAPE_DM JOBTAPE 20 56/56.0 Terminal TMux CDM_CONSOLE_DM CONSOLE 21 56/56.1 Terminal TMux CDM_CONSOLE_DM TERM 22 56/56.3 Terminal TMux CDM_CONSOLE_DM HPUPSDEV ========================================= The third number, reading left to right, of the path address is the SCSI bus address of the peripheral, as you currently have it installed. In the example above, the disk named LDEV 1 is at SCSI bus address 5. Wirt Atmar * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *