> To All: > > Chris asked, > > Showjobs gave me a listing of open sessions on our HP3000. We have a > limit of 60 jobs, JLIMIT and SLIMIT both =60. Hmmmmmm.......... A limit of 60 jobs and 60 sessions? This sounds suspiciously like no one ever modified the default limits in sysgen. You probably have paid HP for at least 64 licenses if not more and are just not configured to use them. From the : prompt if you type in SHOWVAR HPUSERLIMIT You will get something like...... HPUSERLIMIT = -1 Which is the number of licenses you purchased, a -1 indicates unlimited licenses. If you go into SYSGEN under the MI for miscellaneous section and type SHOW then the following info will show: JOB command parameter MAX MIN CURRENT ----------------- ----------- ---------- ---------- ---------- MAXIMUM LIMIT maxlimit 3010 0 3010 SESSION command parameter MAX MIN CURRENT ----------------- ----------- ---------- ---------- ---------- MAXIMUM LIMIT maxlimit 3010 1 3010 These are the limits you have set for yourself regardless of what you purchased from HP. If HPUSERLIMIT is larger than 60 (and I'll bet you a buck it is) then you need to change your settings in SYSGEN and reboot the system to make them take effect. This will allow you to use all the licenses you purchased from HP in the first place. Let me know if you need the syntax to do this. Paul * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *