Things to check: Is your JINETD job running (enabling TCP/IP) on the "problem" HP3000? Also, my NPCONFIG for our networked LP also has TCP_PORT_NUMBER = 9100 and PJL_SUPPORTED = TRUE configured also). Good Luck! ---------- Several months ago we configured device LP (DEV=6) to be a network printer on all three of our HP3000 computers. Now it appears to not be working on two of them but works fine on one. The configurations appear to be identical between the computers where it does not work and the one that does. Anyone have any suggestions what to look for? I am probably just having a brain fart and forgetting something obvious. MPE/iX 6.0 PP2 On the computers where it does not work, print files just sit there without printing. The outfence and priority look OK to me. /showout dev=lp DEV/CL DFID JOBNUM FNAME STATE FRM SPACE RANK PRI #C LP #O27109 #S193 LP READY 16 5 8 1 LP #O27110 #S193 LP READY 16 6 8 1 2 FILES (DISPLAYED): 0 ACTIVE 2 READY; INCLUDING 2 SPOOFLES, 0 DEFERRED 0 OPENED; INCLUDING 0 SPOOFLES 0 LOCKED; INCLUDING 0 SPOOFLES 2 SPOOFLES: 32 SECTORS OUTFENCE = 7 I have done a STOPSPOOL and STARTSPOOL on device 6. LP currently looks like: /showdev lp LDEV AVAIL OWNERSHIP VOLID DEN ASSOCIATION 6 SPOOLED SPOOLER OUT I have done a ping on the network address on both the machine that works and the ones that do not. All HP3000's PING the address 199.60.248.60 fine. I am able to print to the printer from a PC on the network. As far as I can see, both SYSGEN and the NPCONFIG for the device are identical on both machines. The one that works: io> ld 6 LDEV: 6 DEVNAME: OUTDEV: 0 MODE: OS ID: HPTCPJD RSIZE: 66 DEVTYPE: PP PATH: NONE MPETYPE: 32 MPESUBTYPE: 0 CLASS: LP SPOOLED NETLP NPCONFIG entry: 6 (network_address = 199.60.248.60 # LJ 3SI in Printer Room setup_file = SLPL132S.PRTENV.SYS message_interval = 300) The one that doesn't: io> ld 6 LDEV: 6 DEVNAME: OUTDEV: 0 MODE: OS ID: HPTCPJD RSIZE: 66 DEVTYPE: PP PATH: NONE MPETYPE: 32 MPESUBTYPE: 0 CLASS: LP SPOOLED NETLP NPCONFIG entry: 6 (network_address = 199.60.248.60 # LJ 3SI in Printer Room setup_file = SLPL132S.PRTENV.SYS message_interval = 300) Any ideas? Timothy Atwood Holtenwood Computing http://www.holtenwood.bc.ca/computing/ for Domtar Vancouver Mill (Opinions expressed are mine and do not reflect Domtar) * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * ********** Posted from www.3kworld.com * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *