Art Bahrs wrote: > Hi Jan ;) > Yes, I have the printer hooked up to the first Parallel port on a HP > JetDirect 500X 3 port box... and the printer is a brand new Epson FX-880+. > > My NPCONFIG entry is: > > 4007 (network_address = 10.10.0.135 # Label Printer at Info Sys > pjl_supported = FALSE # turn off pjl support. > jam_recovery = FALSE > setup_file = EPSONLBL.HPENV.SYS) # Label Env Mode > > I am using the following commands in my setup file for the printer: > > <esc> E > <esc> @ > <esc> P > <esc> C1 > <esc> l4 > <esc> Q49 > <esc> k2 > <esc> 0 > > Thanks for any help :) > > Art > > ----- Original Message ----- > From: "Jan Gerrit Kootstra" <[log in to unmask]> > To: <[log in to unmask]> > Sent: Wednesday, February 06, 2002 12:02 PM > Subject: Re: [HP3000-L] Network Printing to Dot Matrix Printers > > > Art Bahrs wrote: > > > > > Hi All :) > > > Does anyone out in Listland have dot matrix printers hooked up to > their > > > 3k's as network printers? If so I would love (and really need) some > help on > > > this. > > > > > > Thanks, > > > Art "really stumped" Bahrs > > > > > > * To join/leave the list, search archives, change list settings, * > > > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * > > > > Art, > > > > > > Does your dot matrix printer have a networkconnection at the moment? If > not we > > recommend our clients to use > > external Hewlett Packard jetdirect boxes. > > > > Ones you have done that, I can help you further by direct email. I will > keep > > the newsgroup posted, but I have only > > Usenet access at home and not at work right now. > > > > > > -- > > Regards, > > > > Jan Gerrit Kootstra > > System Engineer > > PinkRoccade Online BV > > PhD Student CFD and Numerical Math > > University of Groningen (RuG) > > [These opinions and remarks are my own, and may not reflect policies of > PinkRoccade or RuG.] > > > > * To join/leave the list, search archives, change list settings, * > > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * Art, You'll need to specify the tcp/ip port of to direct to the first parallel port of the jetdirectbox. I think it is tcp_port_number=9001. Please try that, if that does not work I'll get back to you around 09:30 hours MET (GMT+1) -- Regards, Jan Gerrit Kootstra System Engineer PinkRoccade Online BV PhD Student CFD and Numerical Math University of Groningen (RuG) [These opinions and remarks are my own, and may not reflect policies of PinkRoccade or RuG.] * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *