Since I didn't a reset of my DTCs, connecting with the -d option resolved the problem. Thanks to everybody. Beghein Johan. [log in to unmask] Beghein Johan <[log in to unmask]> a écrit dans le message : bs5J7.866$2d3.10527@nreader3.kpnqwest.net... > Hello, > > I'm migrating from a hp3000 969ks/200 to a e3000 N4000-100-330 > > I still use a few terminals connected to DTC and managed by Openview DTC > Manager. > > On the 3000 side, I configured everything in nmmgr, and linked my DTS to a > link > named DTSLINK. > > The DTSLINK is on lanic 0/0/0/0 and configured as BT100. > > On the OV side, I configured a medium computer, with the mac adress found > with the > lincontrol @;status=all command. > > My OV station and my DTC's are still on a coax, and my N4000 is plugged with > rj45 > in a hub connected to this coax. > > From OV, i can do a reset of an ldev on my N4000, so I assume the physical > link is correct. > > But from a terminal, with non nailed access, I can't connect to the domain > of my N4000 > > dtc07> c hpn4000.mouscron.boulanger > > Connecting... > > Connection refused due to a communication failure (DTC15) > > Any idea ? > > Thank You. > > Beghein Johan. > [log in to unmask] > > > > * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *