In the Native Mode Spooler Reference Manual it talks about banner_intray and data_intray. In the text for both of these items it mentions that what the spooler will do is take the value you supply and wrap the PCL command sequence Esc&l#H around it. If you then look at the manual that comes with the Laser Jet you will find a section called Common PCL Printer Commands. In that section you will find 'paper source' and it talks about Esc&l#H and gives values and what paper tray will be used. In the Laser Jet 4000 manual I have it list the following: 1 = Tray 2 4 = Tray 1 5 = Tray 3 8 = Tray 4 plus several other values for various other kinds of paper trays and attachments. So if you want paper from tray 4 then 'data_intray = 8' is what you want in your NPCONFIG file. If you are using banner pages then you will want to select the appropriate tray for that and use 'banner_intray = x'. HTH * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *