Shorthand summary of commands: :cstm map sel device # info infolog exit ok Here is a running of those commands on a 6.5 system under cstm. :cstm Running Command File (/usr/sbin/stm/ui/config/.stmrc). This operation may take approximately one minute. -- Information -- Support Tools Manager Version A.11.00 Product Number B4708AA (C) Copyright Hewlett Packard Co. 1995-2000 All Rights Reserved Use of this program is subject to the licensing restrictions described in "Help-->On Version". HP shall not be liable for any damages resulting from misuse or unauthorized use of this program. cstm>map hp917 Dev Last Last Op Num Path Product Active Tool Status === ==================== ========================= =========== ============= 1 52 NIO SCSI Interface (14) 2 52.0.0 SCSI Tape (HPHP35470A) Information Successful 3 52.1.0 Unknown () 4 52.2.0 SCSI Disk (HPC2490AM) Expert Tool Successful 5 52.5.0 Unknown () 6 52.8.0 Unknown () 7 52.9.0 Unknown () 8 56 NIO LAN/Console Interface Expert Tool Successful 9 62 CPU (282) Information Successful 10 63 MEMORY (14) Information Successful cstm>sel device 10 cstm>info cstm>infolog -- Converting a (4828) byte raw log file to text. -- Preparing the Information Tool Log for MEMORY on path 63 File ... .... hp917 : 192.6.1.37 .... -- Information Tool Log for MEMORY on path 63 -- Log creation time: Tue Apr 24 09:33:47 2001 Hardware path: 63 Basic Memory Description Module Type: MEMORY Total Physical Memory : 256 MB Total Configured Memory : 256 MB Page Size: 4096 Bytes Memory interleaving is not supported on this machine. Memory Board Inventory Total Phys Configured Disabled Board Size (MB) Total (MB) Total (MB) ------------ ---------- ---------- ---------- (24/2977) Continue? 0A/B 64 64 0 1A/B 32 32 0 2A/B 32 32 0 3A/B 64 64 0 4A/B 64 64 0 ---------- ---------- ---------- System Total: 256 256 0 Memory Controller Inventory Hard Hardware Hardware Software Software Physical Model Revision Model Revision Software IODC Address Number Number Number Number Option Revision ---------- -------- -------- -------- -------- -------- -------- 0xfffbf000 0x14 0 0x9 0 0 2 Bank Inventory Inter Log. Phys Size leave Bank Bank Board (MB) Disabled? SPA Range (Hex) Group ---- ---- ------------ ---- --------- --------------------- ----- 0 0A/B 64 enabled 0x08000000 - 0bffffff N/A (47/2977) Continue? 0 1A/B 16 enabled 0x0f000000 - 0fffffff N/A 1 1A/B 16 enabled 0x0c000000 - 0cffffff N/A 0 2A/B 16 enabled 0x0e000000 - 0effffff N/A 1 2A/B 16 enabled 0x0d000000 - 0dffffff N/A 0 3A/B 64 enabled 0x00000000 - 03ffffff N/A 0 4A/B 64 enabled 0x04000000 - 07ffffff N/A Memory interleaving is not supported on this machine. SPA - Page Map SPA Range (Hex) Corresponding Pages --------------------- -------------------------- 0x00000000 - 03ffffff 0 - 16383 0x04000000 - 07ffffff 16384 - 32767 0x08000000 - 0bffffff 32768 - 49151 0x0c000000 - 0cffffff 49152 - 53247 0x0d000000 - 0dffffff 53248 - 57343 0x0e000000 - 0effffff 57344 - 61439 0x0f000000 - 0fffffff 61440 - 65535 Memory Error Log Summary (70/2977) Continue? The memory error log is empty. Page Deallocation Table (PDT) This machine is not designed to have a Page Deallocation Table. Memory Controller Rev Port Memory controller rev port not available. -- Information Tool Log for MEMORY on path 63 -- View - To View the file. SaveAs - To Save the file. Print - To Print the file. Enter Done, Help, Print, SaveAs, or View: [Done] cstm>exit -- Exit the Support Tool Manager -- Are you sure you want to exit the Support Tool Manager? Enter Cancel, Help, or OK: [OK] ok : ----- Original Message ----- From: "Jeff Kubler" <[log in to unmask]> To: <[log in to unmask]> Sent: Monday, April 23, 2001 4:01 PM Subject: Question regarding stm > To all; > Prior to 6.5 you could use Sysdiag with the memmap command to see the > memory configuration. What is the command under stm to get this > information? Is there another command that provides this info? > > Thanks, > Jeff Kubler > Jeff Kubler > Kubler Consulting, Inc. > 541-745-7457 > Fax: 810-885-1840 > email: [log in to unmask] or [log in to unmask] > www.kublerconsulting.com > > * To join/leave the list, search archives, change list settings, * > * etc., please visit http://raven.utc.edu/archives/hp3000-l.html * * To join/leave the list, search archives, change list settings, * * etc., please visit http://raven.utc.edu/archives/hp3000-l.html *