Hi. I am trying to connect a HP3000 to a HPUX Console Server. I am not familiar with HPUX Console Server and the Unix admins are not familiar with the HP3000, so we are not certain if this can be done. I have a 939KS/030 running MPE 6.5 PP1. At the end of the console cable, I have attached a DB25F>RJ45 RS232 connector. I have also tried adding a null modem between the cable and connector, in case 2 and 3 are crossed. In either case, I get nothing at the console. We are not sure if the problem is in the wiring between the hub and the HP3000, or the Console Server. I believe the wiring should be straight through on pins 2, 3, and 7. Supposedly, the Console Server is emulating a HP 700/96 terminal. Any help is greatly appreciated. I would've posted this at ITRC if the site were working properly. So, I am hoping some of you HP engineers familiar with HP3000/9000 can answer this.