Cathy, Part 1: You set up devices for autoreply inside of sysgen. You can do something similar to the following. :Sysgen sysgen> IO io>md 7;mode=autoreply io>hold io>exit sysgen>keep sysgen>exit Part 2: You can specify a device to autoeject by using DEVCTRL.MPEXL.TELESUP. echo ******************* DEVCTRL SYNTAX ERROR *********************** echo echo Usage Syntax: echo DEVCTRL LDev COMPRESSION=Compress EJECT=Eject LOAD=Load where echo LDev - Logical Device Number (Required) echo Compress - [Enable | Disable | Nochange] echo Eject - [Enable | Disable | Nochange] echo Load - [Online | Offline | Nochange] echo echo ******************* DEVCTRL SYNTAX ERROR *********************** Hope that this helps. ____ Tony Newton | [log in to unmask] HP Systems Admin | (503) 574-5831 Providence Health Plan | www.providence.org > -----Original Message----- > From: Cathy Gunderson [SMTP:[log in to unmask]] > Sent: Friday, August 04, 2000 11:38 AM > To: [log in to unmask] > Subject: [HP3000-L] Help - Setting AutoReply & AutoEject > > I need help on how to set the Auto Reply and Auto Eject for LDEV 7 on. I > believe this is done with a SET command but can't remember the format of > the > command. We are on MPE/iX 6.0. > Thanks. > > Cathy