Subject: | |
From: | |
Reply To: | |
Date: | Wed, 1 Dec 1999 07:41:42 +0100 |
Content-Type: | multipart/mixed |
Parts/Attachments: |
|
|
> >Does anyone understand what exactly this means and how I can correct
it?
>
> No, but often times one can decode the PortIDs as 4 hex numbers to get
> the IP address, and that often helps. I calculate them as follows:
>
> $869DD400 = 134.157.212.0
> $869DEE40 = 134.157.238.64
>
> These look like strange numbers. Do you have checksum on for TCP?
(It
> is OFF by default...that is never a good idea.)
>
> Hope this helps,
>
> Steve Cooper
>
Thanks for your reply,
I do NOT have checksum on for tcp. Could this be the problem? Also, we
do not have IP addresses in the range of 134.157... but in 128.116...
Still in the dark...
On Tue, 30 Nov 1999 04:45:44 -0500, "Ogunsanya A.T."
<[log in to unmask]> wrote:
>** NETXPORT TCP; Bad status
>- Loc: 11912; Class: 1; Parm= $00000003; PortID: $869DD400
>
>and after some more lines of user logon processes,
>
>** NETXPORT TCP : INBOUND; Packet error
>- Loc: 11911; Class: 1; Parm= $00000000; PortID: $869DEE40
>
>Does anyone understand what exactly this means and how I can correct it?
No, but often times one can decode the PortIDs as 4 hex numbers to get
the IP address, and that often helps. I calculate them as follows:
$869DD400 = 134.157.212.0
$869DEE40 = 134.157.238.64
These look like strange numbers. Do you have checksum on for TCP? (It
is OFF by default...that is never a good idea.)
Hope this helps,
Steve Cooper
|
|
|