Hi John,
You can manage gateways using NMMGR.
F1 (open config)
F2 (NS) - F2 (Unguided) - F1 (Nextxport) -F3 (Go to NI)
F6 (Modify NI) - F3 (Go to Internet)
This should get you to the gateways.  Enter the name of the gateway and press F6 (modify).  At this point you can add/delete/modify your addresses.
After you finish, press F6 (Save data) and get back to the screen where you see F5 (Utility) by pressing F8 as many times as necessary.  
Press F5 (Utility).
F3 (Go to Validate)
F1 (Validate Netxport)
Exit NMMGR and restart the network.

These instructions originally came from Joe Geiser and have served me well, many times.

Claire



Claire Pope
Director of Comp Oper & Spec Proj
Mary Washington College
1301 College Ave
Fredericksburg VA  22401

Phone:    (540) 654-2260
Fax:         (540) 654-1596
Email:       [log in to unmask]

>>> "Johns, John A." <[log in to unmask]> 11/11/99 07:15AM >>>
Hello all,

Could someone please help me with Gateways and Routes on our HP3000.  I am
the network administrator, and we need to accomplish two things. First
remove some old (BAD) routes.
Second and a new route.  I would appreciate any help on this matter.

Thanks in advance,

John A. Johns, MCSE, MCP+I, CCNA, A+
System Engineer
The Hillman Company
1900 Grant Building
Pittsburgh, PA 15219
412.338.3585 - Office
412.370.2454 - Cell
412.338.3425 - Fax
[log in to unmask]