Hi,

we are using the HP Laserjet 8100. We tried to connect the printer with
the Jetdirect card. Printing small spool files worked fine.

Printing large files, after 200 sheets the printing slows down to 1 page
per minute.
Maybe it's a configuration problem, but now we use a serial connection 
and a parallel/seriell-adapter.

Best regards

Ralph Alexander
[log in to unmask]

EGSTON Ges.m.b.H.               Tel.: +43 (2984) 2226-279
Grafenbergerstrasse 37  Fax: +43 (2984) 2226-204
A-3730 Eggenburg                www.egston.com
Austria

npconfig.pub.sys:
84          (network_address = 192.111.222.216 &
            PJL_SUPPORTED = FALSE             &
            setup_file = hplj8100.pub.sys)

hplj8100.pub.sys:
-12345X@PJL DEFAULT COPIES=1
-12345X@PJL DEFAULT ORIENTATION=PORTRAIT
-12345X@PJL DEFAULT PAPER=ISO A4
-12345X@PJL DEFAULT MPTRAY=FIRST
-12345X@PJL DEFAULT MANUALFEED=OFF
-12345X@PJL DEFAULT FORMLINES=72
-12345X@PJL DEFAULT LPARM:PCL SYMSET=ROMAN8
-12345X@PJL DEFAULT LPARM:PCL PITCH= 17.20
-12345X@PJL DEFAULT LPARM:PCL FONTSOURCE=I
-12345X@PJL DEFAULT LPARM:PCL FONTNUMBER=0
-12345X@PJL DEFAULT ECONOMODE=OFF
-12345X@PJL DEFAULT DENSITY=3
-12345X@PJL DEFAULT RET=MEDIUM
-12345X@PJL DEFAULT RESOLUTION=300
-12345X@PJL DEFAULT PAGEPROTECT=AUTO
-12345X@PJL DEFAULT AUTOCONT=OFF
-12345X@PJL DEFAULT TIMEOUT=15



-----Ursprüngliche Nachricht-----
Von: Ogunsanya A.T.
[mailto:[log in to unmask]]
Gesendet am: Mittwoch, 29. September 1999 09:08
An: [log in to unmask]
Betreff: HP 8100 printer with HP3000

> Is there anyone using HP's 8100 printer with the HP3000?
> If so, how is the printer connected to the 3000?
>
> We have been using 3si and 4si printers with Xcelnet(?) cards through
serial
> DTC connections.  I would like upgrade these printers and would
appreciate
> some experiences on connecting an 8100 to the 3000.
>
> Thanks,
>
> Karl Hancock
>