OK gurus,  I get the following errors every 60 seconds on my console.  The
laser printer on the network (5siMX) keeps printing the header page
over/over.  Happens once every week or so.  I have to stop the spooler, turn
off the printer, defer the spoolfile, and then start it up again.  When I
called HP the last time I was told to put a command (i forget it
exactly-something=false) in the npconfig file.  It fixed the problem but
caused others that were worse, so I had to back it out.  Attached is also my
NPCONFIG layout.

TIA....................

ERROR:

8:53/209/Output spooler, LDEV #172;  The IPCRECV intrinsic reported error 64
while waiting for a generic event completion.  The error text is:  REMOTE
ABORTED THE CONNECTION.  (SOCKERR 64)  Native Mode Spooler message 9646.

8:54/209/Output spooler, Ldev #172:  Device has reported a power failure or
other interruption while outputting the header for SPOOLID #O21660.  The
spooler will reprint the header.  Native Mode Spooler message 9029.

NPCONFIG layout:


global   (setup_file = pcllp.hpenv.sys
          MESSAGE_INTERVAL = 300
          banner_intray = 1
          banner_trailer = false
          data_timeout = 15
          jam-recovery = false)
172      (network_address = iiljw2.nws.com
          setup_file = pcllp.hpenv.sys)

Kim Borgman, MIS
NWS, Inc.
317-917-1399
[log in to unmask] <mailto:[log in to unmask]>