Nettool will only display the HP3000's view of the world, ie the gateway it
would send the IP packet to, based on the nmmgr ns configuration. Currently
I don't believe there is a traceroute utility for the 3k, though I'd love to
be wrong. So it's just ping and pray.

John

-----Original Message-----
From: Scott Lindholm [mailto:[log in to unmask]]
Sent: Thursday, March 25, 1999 3:13 PM
To: [log in to unmask]
Subject: Re: Traceroute on MPE


Joe,

I am not sure if this is what you are looking for, but in NETTOOL you can
see the source, destination, and gateway IP's:

PRODEAST/HP3K/PUB>nettool.net.sys
NETTOOL Version:      B05090B7

 Enter HELP HELP for an explanation of the help facility.

 Enter HELP OPERATION for guidance on NETTOOL use.

 Commands can be abbreviated, HELP keywords cannot.

 Menu-specific commands for the ROOT:

RESOURCE    CONFIG      NAMEADDR    PING        STATUS      NMDUMP
X25STAT     X25CHECK    IPCINT      XPVAL       XPPERF      QVALNS
NSTEST      LOOPINIT    NSLOGON     SOCKINFO    filters
[1]>>>na
CACHE       MAPPINGS    ROUTING     PATH        filters
[2]NAMEADDR>>>pa
NAME        ADDRESS     filters
[3]NAMEADDR.PATH>>>ad
IP address (e.g. 15.1.2.126):198.251.176.33
IP source     :187.135.105.60 SUBNET: FIDDINI
IP destination:198.251.176.33
IP gateway    :187.135.105.1  SUBNET: FIDDINI   FDDI address
:00801C310060
[5]NAMEADDR.PATH>>>

Hope that helps.




Scott Lindholm

Sr.  Systems Engineer
Voice 719-585-8278
Fax    719-595-2017
Email  [log in to unmask]

>>> Joe Geiser <[log in to unmask]> 03/25 12:00 PM >>>
> Is there a "traceroute" command avaible on MPE ?

It could be sooner than you think :)

Cheers,
Joe Geiser

====================================================
Joe Geiser, President and Senior Partner
CSI Business Solutions, LLC
Phone: +1(215) 945.8100   Fax: +1(215) 943.8408
Toll Free (US/Canada): (877) 945.8100
====================================================