Larry,
DO NOT touch the 4 switch dip switch, that is the SCSI address and Parity!
Look for the 8-pin jumper near the bottom of the card and move it to the EXT position (closer to the outside edge) to switch to the AUI port. The INT position is for the ThinLan.
Regards
Fred
Fred Metcalf
Neil Harvey & Associates, South Africa
HP Channel Partner and HP 3000 Client/Server Integrator
Mobile: +27-82-822-5605 E-mail: [log in to unmask]
Phone: +27-21-531-9288 Fax: +27-21-531-9578
----------
From: Simonsen, Larry[SMTP:[log in to unmask]]
Sent: 13 October 1998 10:25
To: [log in to unmask]
Subject: Re: converting from 10base2 to 10baseT
my 918 lx has a card labeled SCSI/CONSOLE/LAN. this card has the
console, modem, external scsi and network aui/10base2 connectors.
taking the board out it has a 4 switch dip switch. does anyone know
which switch is for the network aui/10base2.
-