Paul, we have a Sportster 28.8 connected through an HP 92219Q modem cable to
a DTC48 modem port.  On the modem, DIP switches 3 and 8 are down, all the
rest up.  I would guess that would be the same on newer modems.  If you need
to know what those settings are, I will find a manual and look them up.  Our
NMMGR settings for the port are:
TermType 10
Speed 19200
Record width 80
Modem type 1
Modem behavior 1
Parity none
Speed/Parity sensing Y
Reset HP terminal N
Hardware handshaking N
Allow :Hello logon Y
NLIO device N

        Don Inghram, Systems Mgr.
        The Christian & Missionary Alliance
        Colorado Springs, CO  (719) 265-2154
        [log in to unmask]


> -----Original Message-----
> From: Paul Maunder [SMTP:[log in to unmask]]
> Sent: Wednesday, October 07, 1998 10:35 AM
> To:   HP3000-L
> Subject:      3000 MODEM HOOKUP
>
>  I would like some information regarding hooking up a US ROBITICS
> SPORTSTER
> MODEM
> as a remote/support modem.  I need to know the configuration strings and
> cables needed to hookup to a serial port. Any system setup information
> would also be very helpful.
> Thanks in Advance,
> PAUL
> Paul R. Maunder         ADVANT, Inc.   Support Solutions for HP Systems
> VP-Sales/Operations             41841 Albrae Street
>                                 Fremont, CA 94538
> http://www.advantinc.com        (800)824-8418     Fax:(510)623-1736
>