Gilles is correct ... the HPC1521B device ID works very well for our DLT's
on all our systems.  We were advised by our backup software vendor not to
use the 'DLT4000' device ID, yet, for just this reason.

Lee Gunter          [log in to unmask]




From: [log in to unmask] on 06/17/98 05:19 PM

Please respond to [log in to unmask]


To:   [log in to unmask]
cc:    (bcc: Lee Gunter/BCBSO/TBG)
Subject:  Re: Request for comment on backup proced




At 05:45 PM 98/06/17 -0600, you wrote:
...snip
>Despite the speed hype of DLTs, it takes us over 3 hours to restore files
>(even small ones) from a strip set. They deffinetly hold more data but
>access speed to specific data is sllooww.
....
Actually, the problem with lengthy restore times is due to the fact that
the default DLT driver does not support the "fast search" feature we've
learned to appreciate with our 4mm dat drives.
The workaround to this problem is to simply configure the DLT using device
id HPC1521B - instead of DLT4000 - until HP releases the appropriate
fast-search-enabled driver for DLT4000, which, AFAIK, is still in beta,
although I would gladly stand corrected.
The workaround works very well and has lasted quite a long time at the two
sites I know that are using it.
---------------------------------------------------------------------------
Gilles Schipper
GSA Inc.
HP3000 & HP9000 System Administration Specialists
300 John Street, Box 87651   Thornhill, ON Canada L3T 7R4
Voice: 905.889.3000     Fax: 905.889.3001
Internet:  [log in to unmask]
---------------------------------------------------------------------------