HP3000-L Archives

February 1998, Week 4

HP3000-L@RAVEN.UTC.EDU
Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
Re: Network Printing
From:
[log in to unmask]
Reply To:
[log in to unmask]
Date:
Tue, 24 Feb 1998 22:43:05 -0600
Content-Type:
text/plain
Parts/Attachments:
text/plain (64 lines) 
In article <[log in to unmask]>,
  "Stewart, Mike (MCO)" <[log in to unmask]> wrote:
>
> Has anyone tried to network print to HP Laser III printer (or any other)
> using an Emulex network printer server attached to the printer instead of
> JetDirect card/device? The device has an IP address the same as a jetdirect
> card and serves the same purpose. We keep getting these messages:
>
> CONSOLE HAS BEEN SWITCHED FROM LDEV 20 TO LDEV 158 .
> MCOA: %13:40/160/Output spooler, LDEV #300:  Started.
> 13:40/160/Output spooler, LDEV #300:  SNMP error SNMP_NoSuchName reported
> while retrieving printer status.
> Native Mode Spooler message 9656
>
> 13:40/160/Output spooler, LDEV #300:  Cannot communicate with network
> printer.
> Check network xport config, NPCONFIG.PUB.SYS, xport and links started
> status,
> intermediate network, and printer status.
> Native Mode Spooler message 9662
>
> 13:41/160/Output spooler, LDEV #300:  Received a command while outputting a
> file.
> 13:41/160/Output spooler, LDEV #300:  Received a command while outputting a
> file.
> 13:41/160/Output spooler, LDEV #300:  The file system reported a device
> error
> during header processing.
> Native Mode Spooler message 9539
>
> 13:41/160/Output spooler, LDEV #300:  FDEVICECONTROL error.
> Native Mode Spooler message 9547
>
> 13:41/160/Output spooler, LDEV #300:  Unable to reconnect to printer
> socket after an abnormal disconnection.
> Native Mode Spooler message 9647
>
> 13:41/160/Output spooler, LDEV #300:  FWRITE error.
> Native Mode Spooler message 9549
>
> 13:41/160/Output spooler, LDEV #300:  Received a command while outputting a
> file.
> Native Mode Spooler message 9021
>
> 13:41/160/Output spooler, LDEV #300:  The spooler could not complete
> output of file O23457.OUT.HPSPOOL.
> Native Mode Spooler message 9511
>
> 13:41/160/Output spooler, LDEV #300:  Stopped.
> console 20
> CONSOLE HAS BEEN SWITCHED FROM LDEV 158 TO LDEV 20 .
> MCOA: %
>
> Any help is appreciated.
> [log in to unmask]
>

You might also check that you have an up-to-date version of the Emulex
software (is this a NetJet or NetQue?).  I believe they have made several
changes recently that might affect your results.

-----== Posted via Deja News, The Leader in Internet Discussion ==-----
http://www.dejanews.com/   Now offering spam-free web-based newsreading

ATOM RSS1 RSS2