HP3000-L Archives

February 1998, Week 3

HP3000-L@RAVEN.UTC.EDU

Options: Use Monospaced Font
Show Text Part by Default
Show All Mail Headers

Message: [<< First] [< Prev] [Next >] [Last >>]
Topic: [<< First] [< Prev] [Next >] [Last >>]
Author: [<< First] [< Prev] [Next >] [Last >>]

Print Reply
Subject:
From:
Rick Clark <[log in to unmask]>
Reply To:
Rick Clark <[log in to unmask]>
Date:
Fri, 20 Feb 1998 14:06:54 -0500
Content-Type:
text/plain
Parts/Attachments:
text/plain (66 lines)
Stewart, Mike (MCO) wrote:

> Has anyone tried to network print to HP Laser III printer (or any other)
> using an Emulex network printer server attached to the printer instead of
> JetDirect card/device? The device has an IP address the same as a jetdirect
> card and serves the same purpose. We keep getting these messages:
>
> CONSOLE HAS BEEN SWITCHED FROM LDEV 20 TO LDEV 158 .
> MCOA: %13:40/160/Output spooler, LDEV #300:  Started.
> 13:40/160/Output spooler, LDEV #300:  SNMP error SNMP_NoSuchName reported
> while retrieving printer status.
> Native Mode Spooler message 9656
>
> 13:40/160/Output spooler, LDEV #300:  Cannot communicate with network
> printer.
> Check network xport config, NPCONFIG.PUB.SYS, xport and links started
> status,
> intermediate network, and printer status.
> Native Mode Spooler message 9662
>
> 13:41/160/Output spooler, LDEV #300:  Received a command while outputting a
> file.
> 13:41/160/Output spooler, LDEV #300:  Received a command while outputting a
> file.
> 13:41/160/Output spooler, LDEV #300:  The file system reported a device
> error
> during header processing.
> Native Mode Spooler message 9539
>
> 13:41/160/Output spooler, LDEV #300:  FDEVICECONTROL error.
> Native Mode Spooler message 9547
>
> 13:41/160/Output spooler, LDEV #300:  Unable to reconnect to printer
> socket after an abnormal disconnection.
> Native Mode Spooler message 9647
>
> 13:41/160/Output spooler, LDEV #300:  FWRITE error.
> Native Mode Spooler message 9549
>
> 13:41/160/Output spooler, LDEV #300:  Received a command while outputting a
> file.
> Native Mode Spooler message 9021
>
> 13:41/160/Output spooler, LDEV #300:  The spooler could not complete
> output of file O23457.OUT.HPSPOOL.
> Native Mode Spooler message 9511
>
> 13:41/160/Output spooler, LDEV #300:  Stopped.
> console 20
> CONSOLE HAS BEEN SWITCHED FROM LDEV 158 TO LDEV 20 .
> MCOA: %
>
> Any help is appreciated.
> [log in to unmask]

I am assuming you are on 5.5....

 If I recall correctly, the network printing in 5.5 would only work with HP
Jetdirect cards.

If not, have you tried pinging the IP address?

Rick Clark
P/A for WW&R
Cleveland, Ohio

ATOM RSS1 RSS2