Yes, as long as they realize that the priority reverts back to CS when the
job is restarted.  If you want something more permanent the only option I
know of today is to use the LINKEDIT method.

Gary

>>> Joe Geiser <[log in to unmask]> 11/21/97 10:37am >>>
Couldn't one change the job, however, after it starts execution, as
follows?

  :ALTPROC ;JOB=#Jnnn;PRI=DS

Which should change the main and all sons to the DS subqueue..  Note that
this really is not recommended, as it could affect some network
performance...but it should be possible using this method...

Joe

Joe Geiser - CSI Business Solutions, LLC
** Your Client-Server and Internetworking Specialists
140 Bristol-Oxford Valley Road, Suite 102
Langhorne, PA  19047-3083, USA
Phone: +1 215.945.8100   Fax: +1 215.943-8408
[log in to unmask]            http://www.csillc.com

-----Original Message-----
From: Gary Dietz <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Date: Friday, November 21, 1997 1:22 PM
Subject: HPDARPA job -Reply -Reply


>This is not currently possible, since there is no job card (they must be
>building it dynamically) for you to edit.  However, when I asked this
>question on this list a few months back, Lars Appel indicated that he had
>heard that this capability would be available in the MPE/iX Express 3
>release.  I just browsed through my Communicator and didn't see it in
there
>anywhere, but that doesn't necessarily mean that it isn't really included
>in Express 3.  Perhaps one of the HP folks can clarify this?
>
>One current option, as provided by Doug Werth in response to my earlier
>query, is to use LINKEDIT's ALTPROG command to alter HPDADVR.PUB.SYS and
>put it permanently in the DQ (or EQ) that way.
>
>Gary Dietz
>Whitman College
>[log in to unmask]
>
>>>> Art Bahrs <[log in to unmask]> 11/21/97 09:54am >>>
>Hi Ron,
>    I think you just have to put a ";INPRI=DS" on the job card at the
start
>of
>the job :)  if not someone will correct me :) heheh
>
>Art "TGIF says it all :) " Bahrs
>
>>>> Ron Horner <[log in to unmask]> 11/21/97 08:45am >>>
>This job runs in CS and I was asked how to change this to DS.  The ROM
>doesn't have anything about changing queues.  I'm not even sure if this
>will cause any problems.
>
>Let me know, please....thanks!