 
| Subject: | |
| From: | |
| Reply To: | [log in to unmask][log in to unmask], 18 Sep 1997 16:16:16 -0400425_us-ascii You need to add the following to NPCONFIG.PUB.SYS: ldevno (network_address = ipdaddr tcp_port_number = 9101) where ldevno is replaced by the printer ldev no. ipaddr is replaced by the ip address of the printer If you wish to address port 3, you need to specify tcp_port_number = 9102. Incidentally, the default tcp_port_number is 9100, which corresponds to port 1 of the JD EXT 3. [...]39_18Sep199716:16: [log in to unmask] |
| Date: | Wed, 17 Sep 1997 16:22:11 +0000 |
| Content-Type: | text/plain |
| Parts/Attachments: |
|
|
> As I understand it, the swap tapes from Chicago were corrupted due to a bad
> version of STORE on Chuck's system... ? He also mentioned (if I recall
> correctly) that he may have used TRANSPORT mode to get around it, which
> wouldn't make the HFS files very useable (if present at all)...
Au contrare! I spend all day Sunday modifying the FREEWARE account so that
it contains nothing but non-HFS files, so that it could be put on a
;TRANSPORT mode tape.
However, I don't know how well the result works on 5.0... Versions 1 and 2 of
the FREEWARE tape were intended to not have any non-HFS files, but we had
problems with LZW, MOVER, and TAR on 5.0 with large bytestream files -- and I
don't believe the problems were ever solved.
---
Michael D. Hensley | mailto:[log in to unmask]
Allegro Consultants | http://www.allegro.com
650/369-2303
|
|
|
