Gary

We don't have Mopiers, but I believe it is based on the 5Si. here is an
npconfig with 6 5Si's

global (setup_file = LJ5SISET.HPENV.SYS         #LaserJet 5Si
        message_interval = 60                   #Repeat msgs every 60 se
        banner_header = FALSE                   #no banner
        banner_trailer = FALSE                  #no banner
        pjl_supported = TRUE                    #full PJL
        jam_recovery = TRUE                     #recover from paper jams
        )

501  (network_address = 174.22.162.1)
502  (network_address = 174.22.162.2)
503  (network_address = 174.22.162.3)
504  (network_address = 174.22.162.4)
505  (network_address = 174.22.162.5)
506  (network_address = 174.22.162.6)


The file LJ5SISET.HPENV.SYS looks like this (72 byte per line ascii
file):-

.Z.E
.&l1t0s1o1L
.&l8d0e84F
.&a05L
.&(10U
.(s0ps16.66h8.5v0s0T
.&k07.1H
.&l26a5.8C

Where the . is an escape sequence.

This should get you started :)

Regards

Neil Harvey



> -----Original Message-----
> From: Gary L. Biggs [SMTP:[log in to unmask]]
> Sent: Friday, August 15, 1997 7:25 PM
> To:   [log in to unmask]
> Subject:      Laserjet 5si MX (mopier) npconfig for 5.5
>
> In a couple of weeks, I will need to set one of these up
> for a new customer of ours. I've never done one of these multi-bin
> printers. If anyone has any advice on configuration and use or would
> care to
> share their NPCONFIG files, I would appreciate the help.
>
>
> Gary L. Biggs, N5TTO
> [log in to unmask]
> Interex SIG Allbase Chair
>
> "Abandon all hope, Ye who Inter(net) here" --
> Dante, over the portal(router) to Hell